-6-
Fig. 8 • Mounting the handle - 1
Fig. 9 • Mounting the handle - 2
7. Mounting the handle
Mount the Handle Stopper
[61]
to the Gear Cover
[38]
and secure it with the Back Cover
[78]
. Be sure to
put the two Handle Dampers
[57]
in Handle Spring (A)
[56]
and Handle Spring (B)
[55]
to prevent
abnormal noise.
Secure handle (A) of Handle (A).(B) Set
[111]
to the Handle Weight
[60]
and Handle Shaft
[110]
. After
wiring, put the switch lever into the lock-ON state and secure handle (B).
NOTE: It is impossible to mount handle (B) without putting the switch lever into the lock-ON state.
[38]
[61]
[78]
[57]
[56]
[55]
While pulling the Switch Lever
[109]
all the way,
push the pushing button to put into lock-ON state.
After securing handle (B), release the lock-ON state.
[60]
Handle (A)
Handle (B)
[108]
[110]
[109]
Push
