Hitachi H45MRY Technical Data And Service Manual Download

Page: 3 / 36

CONTENTS

Page

1. PRODUCT NAME ........................................................................................................................... 1

2. MARKETING OBJECTIVE ............................................................................................................. 1

3. APPLICATIONS .............................................................................................................................. 1

4. SELLING POINTS .......................................................................................................................... 2

4-1. Selling Point Descriptions .............................................................................................................. 3

5. SPECIFICATIONS .......................................................................................................................... 5

5-1. Optional Accessories ..................................................................................................................... 6

6. COMPARISONS WITH SIMILAR PRODUCTS .............................................................................. 9

6-1. Specification Comparison .............................................................................................................. 9

6-2. Demolition Performance Comparison ............................................................................................ 9

7. PRECAUTIONS IN SALES PROMOTION ...................................................................................10

7-1. Handling Instructions ................................................................................................................... 10

7-2. Grease Replacement ................................................................................................................... 10

7-3. O-ring Replacement ..................................................................................................................... 10

8. REFERENCE INFORMATION ...................................................................................................... 11

8-1. Striking Operation ......................................................................................................................... 11

8-2. Dynamic Damper with Leaf Spring .............................................................................................. 12

8-3. Vibration-proof Handle thanks to the Transatory Unit and the Neidhardt Spring ......................... 12

8-4. Idling-proof Mechanism ............................................................................................................... 13

8-5. Shock-absorbing Mechanism ...................................................................................................... 14

8-6. Sealed and Dustproof Construction ............................................................................................. 14

8-7. Tool Retainer ................................................................................................................................ 15

8-8. Adjusting Mechanism for the Tool Swivel Angle ........................................................................... 15

8-9. Side Handle ................................................................................................................................. 16

9. REPAIR GUIDE ............................................................................................................................17

9-1. Precautions and Suggestions for Disassembly and Reassembly of the Main Body .................... 17

10. STANDARD REPAIR TIME (UNIT) SCHEDULES .....................................................................28

Assembly Diagram for H 45MRY

Summary of Contents for H45MRY





































Search results

Summary of Contents for H45MRY

Reviews:

Related manuals for H45MRY

Brands by name

Popular brands

Hitachi H45MRY, Technical Data And Service Manual

Search results

Summary of Contents for H45MRY

Reviews:

Related manuals for H45MRY

Brands by name

Popular brands