297
Bit 3—Group 3 Non-Overlap (G3NOV): Selects normal or non-overlapping TPC output for
group 3 (TP
15
to TP
12
)*.
Bit 3
G3NOV
Description
0
Normal TPC output in group 3 (output values change at compare
match A in the selected ITU channel)
(Initial value)
1
Non-overlapping TPC output in group 3 (independent 1 and 0
output at compare match A and B in the selected ITU channel)
Note:
* Since this LSI does not have a TP
14
pin, the TP
14
signal cannot be output off-chip.
Bit 2—Group 2 Non-Overlap (G2NOV): Selects normal or non-overlapping TPC output for
group 2 (TP
11
to TP
8
).
Bit 2
G2NOV
Description
0
Normal TPC output in group 2 (output values change at compare
match A in the selected ITU channel)
(Initial value)
1
Non-overlapping TPC output in group 2 (independent 1 and 0
output at compare match A and B in the selected ITU channel)
Bit 1—Group 1 Non-Overlap (G1NOV): Selects normal or non-overlapping TPC output for
group 1 (TP
7
to TP
4
).
Bit 1
G1NOV
Description
0
Normal TPC output in group 1 (output values change at compare
match A in the selected ITU channel)
(Initial value)
1
Non-overlapping TPC output in group 1 (independent 1 and 0
output at compare match A and B in the selected ITU channel)
Bit 0—Group 0 Non-Overlap (G0NOV): Selects normal or non-overlapping TPC output for
group 0 (TP
3
to TP
0
).
Bit 0
G0NOV
Description
0
Normal TPC output in group 0 (output values change at compare
match A in the selected ITU channel)
(Initial value)
1
Non-overlapping TPC output in group 0 (independent 1 and 0
output at compare match A and B in the selected ITU channel)