EN-52
Playing Back Still Imag
e
s/Vid
e
o Clips on a TV
You can also play back your images on a TV screen. Before connecting to any video devices, make sure
to select NTSC/PAL to match the broadcast standard of the video equipment you are going to connect
to the camera. Using the AC power adapter is recommended when transferring the recorded images and
video files.
1. Slide the mode switch to [
].
2. Connect one end of the A/V cable to
the A/V OUT terminal of the camera.
3. Connect the other end to the A/V input
socket of the TV set.
4. Turn the TV and camera on.
5. Play back the still images/video clips.
The method of operation is the same as playing back still
images and video clips on the camera.
Refer to the section in this manual titled “Video Output” in the Setup2 Menu for further
details.