64
63
■ Setting the Date Imprint
You can imprint the captured images with the date on which they were taken.
When a still image is captured with the Date Imprint function set to
ON
, the
date is imprinted on the JPEG file of the captured image (in the lower-left
corner). Note that this is different from printing the date information of a file
based on a printer setting, etc.
Press
MENU
to display the
Capture Menu
screen.
1
In the
Capture Menu
screen, select
Date
Imprint
using【
M
】
【
N
】and then select the
ON/OFF
mode using【
O
】
【
P
】.
2
Capture Menu
Date Imprint
Setup
Exit
Off
OK:
Set
O
/
P
:
Change
Capture Menu
Date Imprint
Setup
Exit
On
OK:
Set
O
/
P
:
Change
3
●
The date-imprint setting selected here is retained even after the power is
turned off. However,
Setting to the Default
returns the setting to
OFF
.
●
The date is imprinted in white text, which may be difficult to see against a
white background.
●
Even if the Date Imprint function is set to
ON
, the date won
,
t be imprinted in
the digital zoom mode.
P25
■ Using the Self-Timer
You can capture images using the camera
,
s self-timer function
(which can be set to 10 seconds or 5 seconds).
When the self-timer is used, keep the camera from moving by setting it on a
tripod, etc.
In the Still Image Capture mode, press the
self-timer
button(
【
O
】
)repeatedly to
select the desired timer period.
:The timer period is set to 10 seconds.
:The timer period is set to 5 seconds.
An icon corresponding to the selected timer period is
displayed on the LCD monitor.
1
Set the layout and press the shutter.
●
The self-timer lamp (red) starts blinking and the
number shown on the LCD monitor begins
decreasing, indicating that the self-timer has
started. When the selected timer period elapses,
the camera will emit a bleep sound to indicate
that the image has been captured.
2
●
To stop the self-timer, press the self-timer
button(
【
O
】
).
●
The image capture settings (image size, image quality, white balance, EV, etc.)
are also effective when the self-timer is used.
●
The self-timer function is canceled once the image is captured. To take another
image using the self-timer, set the self-timer again.
Capture
(Still
Image/Video)
Advance
Operations
Pressing
MENU
saves the selected setting,
and the camera exits the
Capture Menu
screen.