EN-29
Protecting Images
Set the data to read-only to prevent images from being erased by mistake.
1. Press the [
7
] button.
2. Select the image that you want to protect with the
e
/
f
buttons.
3. Press the
MENU
button.
4. Select [Protect] with the
c
/
d
buttons, and press
the
SET
button.
5. Select [Single] or [All] with the
c
/
d
buttons, and
press the
SET
button.
6. Select [Set] with the
c
/
d
buttons, and press the
SET
button.
Protection is applied to the image and the
camera returns to the playback mode.
The protect icon [
A
] is displayed with protected
images. When [All] has been selected, [
A
] is
displayed with all the images.
Canceling the Protection
To cancel protection for only one image, display the
image on which you want to remove the image
protection.
1. Select [Protect] with the
c
/
d
buttons from the
playback menu, and press the
SET
button.
2. Select [Single] or [All] with the
c
/
d
buttons, and
press the
SET
button.
3. Select [Cancel Protect] with the
c
/
d
buttons, and
press the
SET
button.
The removal of image protection is executed and the camera returns to the
playback mode.
Formatting an SD/SDHC memory card overrides protection, and erases all images regardless of
their protected status.
