① ② ③ ④
①
LED Indicator
- Power ON mode: BLUE
- Power OFF mode: RED
• Be sure to point the remote control at the remote control sensor on the LED/LCD Display.
②
USB for OPS PC or Rear PC
③
Touch USB (for Laptop PC): When Touch USB is connected to Laptop, internally it is connected to
Laptop automatically.
Touch sensor’s priority is as below.
Internal OPS < External Desk top < Front Notebook
Important Notice
1.
The USB cable (5 m) that Hitachi provides in this accessory box is for use of connection to Touch USB
at the back. Therefore, in case of connecting USB cable to Touch USB in front, separate USB cable is
required and the length of cable is strongly recommended to be less than 3 m to make sure signal
intensity of touch sensor work properly.
2.
HDMI 1 disabled. We recommend to use other HDMI (HDMI 2 or HDMI 3) ports, DP or PC RGB inputs.
④
HDMI Input (Connected to HDMI 2)
4.
Operating the monitor
The control panel of the monitor
