REV0 2010.02.15
-H7-21-
7.8.5 Information Display of Photo / Video / SW / Ultra Sonic Sensor
7.8.5.1 Status of Photo Level / Switch
(1) Specify parameters and click the “RUN” button.
・
Photo gain
:
All gain
(
default
)
・
Lamp mode1
:
Light on
(
default
))
・
Lamp mode2
:
Light off
(
default
)
・
LED
:
ON
(
default
)
・
Hopper position
:
F/L
(
default
)
If necessary, change parameter and perform this.
(2) Level of each photos will be displayed every 2
second
To fix the screen, click the “Pause” button.
To finish display, click the “FINISH” button.
1. Photo level at gain 0 should satisfy the criteria.
Photo number
Criteria
Note
PC22
> 20
Exclude
PC22DBL
●
If it is out of criteria, take actions considering cable disconnection, part failure, contamination, optical
axis shift.
●
Minimum level is at the gain 00 and it becomes larger in accordance with the gain and maximum is
“FF”.
●
If level is not displayed and level will not be changed even lit by flashlight, light receiving section has
issue. If level varies, light emitting section has problem.
2. Judgment of the photos and switches
Switch name
Switch operation
I/L (Inter Lock)
Check by closing/opening the front part of the device.
Close: ”0”
L/L (Lower Level)
Elevator operation / Detect by specifying UP (L/L).
L/L=”1”
F/L (Feed Level)
Elevator operation / Detect by specifying UP (F/L).
Or lift the Pickunit by hands.
F/L=”1”
IPC
NONE
Sensor
PC11
、
PC20
、
PC21
、
PC22
、
PC31
、
PC41
、
PC42
、
PC43
、
PC51
、
PC52
Confirm condition by blocking light with paper or finger.
Normal
condition
Blight: ”1”
Dark: ”0”
Summary of Contents for HT-4139-28
