Ä
23
CONNECTION OF YOUR AV
RECEIVERS AM/FM ANTENNAS
To get the best radio performance connect the AM and
FM antenna as shown in the figure below. (Optional)
)0
$17(11$
$0
$17(11$
You can switch to Radio Mode by using MODE button.
CONNECTION OF YOUR VIDEO
SOURCES (AV OR SCART)
You can connect your Video Sources (DVB, VCR, VDP
etc) to your AV receiver as shown in the figure below.
(Optional)
'9%9&5'9'3/$<(5
79
/
(
)
7
You can switch to AV or SCART using mode button.
PUTTING INTO OPERATION
After making the necessary connections stated above,
plug the power cord to the mains socket. Unit will be in
standby mode. Press standby to turn on the unit. Press
MODE to switch between Disc Player, Radio, AV and
SCART/TV.
SELECTING THE MODE
You can select the DVD player, Radio, AV, TV or SCART
using the Mode button.
Radio
To get the best performance be sure that AM and FM
antenna is connected to the AV receiver. AUDIO VFD grid
will be highlighted in radio mode.
Adjusting the frequency :
Press on the left arrow for AM and Right Arrow for FM.
Band name text and MHz, kHz grids will be displayed on
the VFD.
Press Search Forward or Search Backward to
increase or decrease the frequency till you reach the
desired channel. VFD will display the frequency.
Storing the channel in the Memory :
After adjusting the desired channel you can store it in
the memory . In order to do that ;
Press on the Select button to enter Memory Set mode.
Program grid is displayed on the VFD. You can use
Return button to cancel Memory Set mode.
Press the number button that you want to store this
channel. Use 10+ button to enter two digits. VFD will
display the preset channel number and its frequency.
You can keep 20 AM channels and 40 FM channels in the
memory.
Selecting the preset channels:
Press on the left arrow for AM and Right Arrow for FM.
Press the number button of the desired preset channel.
VFD will display the preset channel number and its
frequency. Use 10+ button to enter two digits.
Press the Skip Next or Skip Previous button to increase
or decrease the preset channel number. VFD will display
the preset channel number and its frequency
Summary of Contents for HTD-K180UK
Page 5: ...Ä5 ...