Ä
34
CONVENIENT FUNCTIONS
Displaying the time information
Press DISPLAY during play.
Each time this button is pressed, a different time
information box is displayed on the screen.
If Single elapsed is displayed, the VFD display on the
unit shows the elapsed time for the title which is being
played
If Single remain is displayed, the VFD display on the
unit shows the remaining time for the title which is being
played.
If Total Elapsed is displayed, the elapsed time for the
disc is being displayed.
If Total remain is displayed the remaining time for the
disc is being displayed.
Pressing the DISPLAY key for the fifth time closes display
menu screen.
Displaying a scene with a larger and closer view
This zoom-in function enables you to take a closer look
at the scene you are viewing. This is especially a
considerate function when you are watching science
fiction or adventure movie.
Press ZOOM during play.
Zoom On is displayed on the screen and the picture is
now larger. You can change the zooming ratio by
pressing ZOOM button more
than once. There are
2,
3,
4,
1/2,
1/3 and
1/4 zoom
modes.
NOTE:
You can move in the picture ie
,
change the zoomed
location by using the
3465
arrow keys. This is valid
for zoom-in only.
To return to normal play
After zoom ratio is 1/4x, press ZOOM again. The picture
is now in its normal size.
AUDIO CD PLAYBACK
Preparations
Press on the power button of your audio system if the
player has been connected to an audio system.
Basic Play
1. Press on the standby button
2. Press OPEN/CLOSE to open the disc tray.
3. Place a disc onto the tray
Hold the disc without touching either of its surfaces,
position it with the printed title side facing up, align it with
the guides, and place it in its proper position.
4. Press OPEN/CLOSE.
Play is commenced.
After operation
When the unit is not in use, remove the disc and press
STANDBY to turn the unit off.
NOTE:
If the disc is placed upside down (and it is a single sided
disc), the VFD display on the player will indicate NO
DISC.
For your reference:
When
symbol appears while a button is being
operated, it means that the player prohibits the
corresponding operation.
Stopping Play
Press stop twice.
For your convenience:
When
STOP
is pressed once, while the play continues,
the unit records the point where the play stopped and
if the
PLAY
key is pressed, play resumes from the point
where
STOP
key was pressed. Press
PLAY / PAUSE
again, and play will resume from this point. When the tray
is opened or the
STOP
is pressed again, the RESUME
function will be cleared.
Summary of Contents for HTD-K180UK
Page 5: ...Ä5 ...
