25
S p e a k e r s S e t u p
To specify the balance and level of the speakers
You can use the Test Tone function to check whether all the
speakers are connected correctly, and to specify the balance
of the speakers.
1
Press the
TEST TONE
button on the remote control.
You will hear the test tone from Front-left speaker, Center
speaker, Front-right speaker, Surround-right speaker and
Surround-left speaker in sequence.
2
Sit at your listening position, use the
VOLUME
and
VOL-
UME
buttons to adjust the level of each speaker..
Adjust the volume level so that the volume of the test tone
from each speaker sounds the same.
The adjusted value will appear on the front panel display
and TV screen. If you do not operate the remote for a few
seconds, the value turns off and is stored in the system.
3
Press
TEST TONE
again to turn off the test tone.
Note
•
The playback will pause during test tone.
•
The test tone only tests the valid speakers, depending on the
current listening mode.
You can vary the level of each speaker as follows. At the same
time, you can adjust the Treble of the front speakers.
1
Press the
SELECT
button to select a channel. The level of
the channel will appear on the front panel display and TV
screen.
TRE (Treble level) adjustable range: -10 dB to +10 dB, 2
dB/step.
FL (Front-left level), CNT (Center level), FR (Front-right
level), SR (Surround-right level), SL (Surround-left level)
and SUB (Subwoofer level) adjustable range: -15 dB to
+10 dB, 1 dB/step.
2
Use the
VOLUME
and
VOLUME
buttons to adjust the
selected channel
’
s level.
3
If you do not press the
SELECT
or
VOLUME
/ buttons
for a few seconds, the values turns off and is stored in the
system.
Note
•
The optional items vary with the changing of listening mode.
To adjust the volume of all the speakers (Master Volume) at
one time
Use the
VOLUME
and
VOLUME
buttons in normal mode.
To shut off all of speakers
’
output
Press the
MUTE
button. The red LED on the front panel starts
to blink.
Press it a second time to release muting and resume the
normal output. The blinking LED blacks out.
VOLUME /
SELECT
VOLUME
SELECT
MUTE
TEST TONE
S T A N D B Y
SUB
TITLE
DVD
T U N E R
AUX
L A N G U A G E
TITLE
R E T U R N
A N G L E
G O T O
M E N U
/PBC
Z O O M
S E T U P
A U D I O
1
D I S P L A Y
2
3
4
5
6
7
8
9
>10
0
N/P
S L E E P
M U T E
O P E N /
CLOSE
ENTER
N
A - B
R E P E A T
P R O G .
S E L E C T
L I S T E N I N G
TEST
T O N E
A D J / V O L
S T O P
P L A Y / P A U S E
S T E P
S L O W
+
STA
-
STA
+
S T / M O
TU
TUN
+
MEMO
