Travelstar 5K160 (PATA) Hard Disk Drive Specification
107
/
188
83
7FE9H
Command set supported
15 (=0) Always
14 (=1) Always
13 (=1) 1=FLUSH CACHE EXT command supported
12 (=1) 1=FLUSH CACHE command supported
11 (=1) 1=Device Configuration Overlay command supported
10 (=1) 1=48-bit Address feature set supported
9 (=1) 1=Automatic Acoustic Management supported
**8 (=1) 1=SET MAX security extension supported
*
**7 (=1) 1=Address Offset feature supported
6 (=1) 1=SET FEATURES subcommand required to spin-up
5 (=1) 1=Power-Up In Standby feature set supported
4 (=0) 1=Removable Media Status Notification Feature Set
supported
3 (=1) 1=Advanced Power Management Feature Set
supported
2 (=0) 1=CFA Feature Set supported
1 (=0) 1=READ/WRITE DMA QUEUED supported
0 (=1) 1=DOWNLOAD MICROCODE command supported
84
4163H
Command set/feature supported extension
15 (=0) Always
14 (=1) Always
13 (=0) 1=IDLE IMMEDIATE with UNLOAD FEATURE
supported
12- 11 (=0) Reserved
10 (=0) 1=URG bit supported for WRITE STREAM DMA
EXT and WRITE STREAM EXT
9 (=0) 1=URG bit supported for READ STREAM DMA
EXT and READ STREAM EXT
8 (=1) 1=64-bit World wide name supported
7 (=0) 1=WRITE DMA QUEUED FUA EXT command
supported
6 (=1) 1=WRITE DMA FUA EXT and WRITE MULTIPLE
FUA EXT commands supported
5 (=1) 1=General Purpose Logging feature set supported
4 (=0) 1=Streaming feature set supported
3- 2 (=0) Reserved
**1 (=1) 1=SMART self-test supported
**0 (=1) 1=SMART error logging supported
Note.1 The '*' mark in 'Content' field indicates the use of those parameters that are vendor specific.
Note.2 The feature marked '**' is able to be unsupported by the Device Configuration Overlay command.
Figure 55 Identify device information --- Continued ---