Travelstar 5K160 (PATA) Hard Disk Drive Specification
33
/
188
6.5.6 Swept sine vibration
49 m/ sec
2
(5 G) (zero-to-peak), 5 to 500 to 10 Hz sine wave
0.5 oct/min sweep rate
25.4 mm (peak-to-peak) displacement, 5 to 10 to 5 Hz
6.5.7 Operating
shock
The hard disk drive meets the criteria in the table below while operating under these conditions:
The shock test consists of 10 shock inputs in each axis and direction for a total of 60.
There must be a minimum delay of 3 seconds between shock pulses.
The disk drive will operate without a hard error while subjected to the following half-sine shock pulse.
Duration of 1 ms
Duration of 2 ms
1568 m/sec
2
(160 G)
3185 m/sec
2
(325 G)
Table 19. Operating shock
The input level shall be applied to the normal disk drive subsystem mounting points used to secure the drive in a
normal system.
6.5.8 Nonoperating
shock
The drive withstands the following half-sine shock pulse without any data loss or permanent damage.
Duration of 1 ms
Duration of 11 ms
9800 m/sec
2
(1000 G)
1470 m/sec
2
(150 G)
Table 20. Nonoperating shock
The shocks are applied for each direction of the drive for three mutually perpendicular axes, one axis at a time. Input
levels are measured on a base plate where the drive is attached with four screws.