Hitachi HV-D30, Brochure & Specs

Color system

NTSC/PAL   

Optical system

1/3-inch, F2.2 prism  

Imaging system

R, G, B 3CCD 

Lens mount

C-mount (Frangeback 17.526 mm in air) 

CCD

1/3-inch interline transfer

Total pixels

NTSC 811(H)

×

508(V) 

PAL 795(H)

×

596(V)  

Effective pixels

NTSC 768(H)

×

494(V)

PAL 752(H)

×

582(V)  

Effective image area

NTSC 4.88(H)

×

3.66(V) mm   

PAL 4.89(H)

×

3.64(V) mm   

Horizontal resolution

800 TV lines (Y signal center, DTL off)  

S/N

NTSC 64 dB (DNR on)  64 dB (DNR off) 

PAL 62 dB (DNR on)  59 dB (DNR off)

(Y OUT, 

γ

off, DTL off, Gain 0 dB)  

Standard sensitivity

2000 lx, F9.5 

Sensitivity setting

AGC (0 to +24 dB) / 

Manual (0 to +24 dB, 1 dB step) 

and Digital gain (approx. 0 to +6 +12 dB, 6 dB step)  

Minimum Sensitivity

0.9 lx(F2.2 +24 dB Digital gain on)

Electronic shutter

4 mode 

Preset mode

1/100 s (PAL 1/60 s) to 1/100,000 s,    

10 steps 

Lock scan mode

NTSC 1/60.38 s to 1/100,000 s  

PAL 1/50.38 s to 1/100,000 s

Auto electronic Shutter (AES)

OFF to 1/100,000 s  

Long term

Field/Frame integration selectable 

Integration

NTSC 1/30 s to 8 s 

PAL 1/25 s to 8 s  (1 frame step)  

(external image memory needed 

for continuous image)  

External trigger

Field/Frame readout selectable 

One pulse trigger input 

White balance mode

Preset  : 3200 K/5600 K selection  

Memory : Auto white balance  

Auto: Real time auto white balance  

Scene files

4 files   

Color bars

NTSC : SMPTE, PAL : FULL

Power supply voltage

12 V rated 

(stable operation at 10.5 to 15 Vdc)

Power consumption

4.5 W approx

Dimensions

65(W) 

×

65(H) 

×

80(D) mm

Mass

400 g(14 oz) approx. (not include lens)

Ambient temperature

Operating : -10 to +45 ºC (+14 to 113 F)

Storage  : -20 to +60 ºC (-4 to 140 F)

1. Digital Signal Processor:

A 3

rd

generation Digital Signal Processor (DSP) chip utilizing

Hitachi’s most recent processing technology (0.18µm, internal
core, 1.8V drive, and 3 million gates) is contained on a single
newly developed ultra LSI (large scale integration) chip.  The
new DSP enables the camera to achieve its small size, low
power consumption, and high stability.

2. Performance in a cube:

The camera is built into a compact cube with a short depth
dimension for easy incorporation into systems where space is
critical.  The multi-functional design is conducive to a wide
range of industrial, medical, and other general purpose imaging
applications.

3. High picture quality:

High Sensitivity and High Resolution are achieved through the
use of three 1/3 inch CCD’s, each with 410,000 picture elements

(470,000 PAL).  Together with the 12-bit analog to digital (A/D)
converter and 14-bit accelerated DSP a horizontal resolution of
800TV lines and a high signal to noise ratio (S/N) of 64 db (62 db
PAL) is obtained with the use of dynamic noise reduction (DNR).
Clear high quality low noise images are now possible even in a
high gain mode.

4. Adjustable Flange back:

A built-in flange back adjustment allows the cameras optical
focus to be optimized with the selected optical system.

5. Auto Shading Compensation (ASC):

The ASC function can automatically compensate for color shad-
ing errors caused by interaction between the lens and prism
assembly in C-Mount optical systems.  Two modes of shading
are provided and can be selected according to the cameras
application, a color shading mode or a two-dimensional lumi-
nance-shading mode.

1.   Four scene files are provided for the setup, storage and recall

of all camera functions.
The camera configuration can be easily changed through the
selection of a scene file.

2.   A six-vector color corrector allows independent adjustment of

the hue and saturation of the primary and secondary colors so
that optimum color fidelity can be maintained.

3.   A versatile color detail adjustment circuit enables the selection

and independent adjustment of detail in two separate colors.
This function can be used as a “flesh tone detail” circuit for
smoothing human complexion, or for enhancing a color con-
tour for increased visibility.

4.   Dynamic Chroma Compensation is provided to maintain proper

color saturation in scenes with high luminous levels.  Dynamic
range is expanded allowing high quality reproduction of out-
door and other difficult scenes.   

5.   Intelligent Auto Level Control (ALC) can be selected to allow

unattended operation over a wide range of light levels.  Digital
light metering, CPU controlled automatic gain control (AGC),
lens iris, and an auto electronic shutter (AES) operate under
continuous control to compensate for varying light levels.  Auto
Tracking White Balance (ATW) can also be selected to maintain
proper color temperature with changing light levels.  Note:
AES functions continuously only with a manual override lens.

6.   Flare Compensation can be adjusted to compensate for color

changes in dark areas, improving color fidelity, when a zoom
lens is used on the camera.

7.   Picture polarity can be selected as normal (positive) or nega-

tive, to suit the imaging requirements.

8.   A full complement of video outputs is provided on the camera.

Outputs include composite, Y/C, RGB, or Y/ R-Y/ B-Y.
Simultaneous output of composite, Y/C and an additional com-
ponent signal is possible, utilizing two separate output con-
nectors.

9.   The camera can be synchronized with external devices using

the genlock input or by use of external HD and VD signals.
Composite sync, HD and VD signals can be output for use with
other equipment.

10. An External Trigger Signal can be used in the field-on-demand

mode of operation to provide the capture of an image at a
desired timing and exposure.  Several trigger modes are avail-
able to suit the intended application.  A long term integration
mode of up to 8 seconds can be used to capture images at
extremely low light levels.  

11. An RS-232C port is provided for bi-directional communications

with an external device, allowing complete control, setup and
operation of all camera functions.

Major specifications

Input and output signals

Dimension

Standard compotion

Standard composition

Major accessories

Pin arrangement

HV-D30 Features

System configurations

Major specifications

HV-D30 Performance

HV-D30 Features

Major specifications

Input and output signals

Dimension

Standard compotion

Standard composition

Major accessories

Pin arrangement

HV-D30 Features

System configurations

Input and output signals

HV-D30 Performance

HV-D30 Features

Major specifications

Input and output signals

Dimension

Standard compotion

Standard composition

Major accessories

Pin arrangement

HV-D30 Features

System configurations

HV-D30 Performance

HV-D30 Features

Standard composition

LENS connector
(Plug:E4-191J-100)

1
2
3
4

UNREG +12V OUT

NC

IRIS CONT/VIDEO

GND

Pin No.

Signal

1

2

3

4

REMOTE connector
(Plug:HR 10A-7P-4P)

1
2
3
4

UNREG +12V OUT

RXD/SD IN

TXD/SD OUT

GND

Pin No.

Signal

12V IN connector
(Plug:R03-P3F)

A
B
C

GND

UNREG +12V

NC

Pin No.

Signal

D-Sub 15-pin connector
(Plug:KEC-15P (Heujing))
(Plug:JK-SP2140 (Pin contact))
(Plug:JK-C151C (Cover, inch))
(Plug:JK-C152C (Cover, miri))

1
2
3

R/R-Y/C OUT

G/Y/Y OUT

B/B-Y/VBS2

Pin No.

Signal

6
7
8

VIDEO GND
VIDEO GND
VIDEO GND

Pin No.

Signal

11
12
13

GND

RXD

HD IN/HD/OUT/SYNC OUT

4
5

WE OUT

GND

9

10

UNREG +12V OUT

TRIG IN

14
15

VD IN/VD OUT/GL IN

TXD

Pin No.

Signal

4

3

1

2

C

A

5 4 3 2 1

15 14 13 12 11

10 9 8 7 6

B

Camera

1

Accessories

Power plug(R03-P3F)

1

Operation manual

1

●

Camera control box, RC-Z3

●

Junction box, JU-Z2

●

Level converter, JU-C20

●

Fujinon, TF2.8DA

TF4DA

TF15DA

T6x6.5D

T10x6D

T14x5.5D  

VIDEO 

REMOTE

DC   IN

LENS

POWER

MULTI

MENU

A W B

A S C

F I L E

L

R

U

D

-

+

C

B

A

65

±

2

32.5

±

1

65

±

2

32.5

±

1

65

±

2

u1

13

±

1

14

±

0.5

2-1/4"UNC(DEPTH:7)

2-1/4"UNC(DEPTH:7)

13

±

1

14

±

0.5

unit : mm

Major specifications

Input and output signals

Dimension

Standard compotion

Standard composition

Major accessories

Pin arrangement

HV-D30 Features

System configurations

HV-D30 Performance

HV-D30 Features

Pin arrangement

Major specifications

Input and output signals

Dimension

Standard compotion

Standard composition

Major accessories

Pin arrangement

HV-D30 Features

System configurations

HV-D30 Performance

HV-D30 Features

HV-D30 Features

Input signals

Genlock (Multi*2)

VBS 1.0 Vp-p±3 dB

or black burst/75 

Ω

HD/VD 2 to 5 Vp-p, negative

External Trigger(Multi)

Low 0 Vdc, High 2 to 5 Vdc

Serialdata (Remote*3)

1.5 Vp-p / High 

( when connected to RC-Z3)

RS-232C level

(when connected to personal computer)

Output signals

Composite video (Video, Multi *1) 

VBS 1.0 Vp-p / 75 

Ω

RGB (Multi)

0.7 Vp-p / 75 

Ω

Component (Multi *1)

Y : VS 1.0 Vp-p / 75 

Ω

R-Y : 0.7 Vp-p / 75 

Ω

B-Y : 0.7 Vp-p / 75 

Ω

Y/C (Multi *1)

Y : VS 1.0 Vp-p / 75 

Ω

C : NTSC BURST 0.286 Vp-p / 75 

Ω

PAL   BURST 0.3 Vp-p / 75 

Ω

Sync (Multi *2)

SYNC/HD : 2.0 Vp-p / 75 

Ω

VD : 2.0 Vp-p / 75 

Ω

Serial data(Remote *3)

1.5 Vp-p / Low

( when connected to RC-Z3)

RS-232C level

(when connected to personal computer)

Note1 : RGB,Component and YC/VBS Multi connector outputs are selected by

menu.

Note2 : Sync and HD Multi connector output are selected by menu.

Inputs (Genlock, HD/VD) and Outputs (Sync, HD/VD) are selected by inter-

nal switch

Note3 : Set internal switch according to connected equipment.

(Factory setting RS-232C)

Major specifications

Input and output signals

Dimension

Standard compotion

Standard composition

Major accessories

Pin arrangement

HV-D30 Features

System configurations

HV-D30 Performance

HV-D30 Features

Major accessories

Dimensions