1. If there is no signal under the iPod mode, the main unit will be switched off within 15 minutes automatically.
2. Please turn the main power off to save energy, when you do not use the unit.
MEMORY BACK-UP
The unit has memory reserved function for 3 hours automatically, and it should make sure the unit connect to mains power and
work for 5 minutes or more duration.
POWER CORD CONNECTION
OPERATING THE UNIT
POWER/STANDBY
CLOCK SETTING
Power Cord Connection
1. Connect the AC/DC Adaptor Tip to the DC jack on the rear of the unit firstly.
2. Connect the AC/DC Adaptor Plug to the AC outlet socket secondly.
Note: In any time, the iPod/iPhone PLAYERS must be fixed well under in the
standby mode to avoid them were damaged.
When you first plug the AC/DC Adaptor plug into the AC outlet socket, the unit
will be in standby mode. You can press the STANDBY/ON button on the unit ( or on the remote control ) to switch the unit ON or
OFF. Pull the AC/DC Adaptor plug out of the wall socket if you want to switch off completely.
Note: During the unit in STANDBY mode, you can also press the FUNCTION button to switch the unit “ON”.To switch off the
unit by pressing the STANDBY button only.
1. Press the STANDBY/ON button on the unit (or remote control) to switch the unit on. The red STANDBY indicator will light off.
2. Select the sound source (iPod, AUX or Tuner) by pressing the FUNCTION button.
3. Adjust the volume with the VOLUME (UP or DOWN) button.
4. Set the preset equalizer ( PASS, CLASSIC, ROCK, POP or JAZZ) with the EQ button on the unit (or remote control).
5. Press the STANDBY button again to turn off the unit. The red STANDBY indicator will light on.
Note:
During the unit in STANDBY mode :
1. Press the MEMORY/CLOCK-ADJ. button to select the12-hour or 24-hour.
LCD DISPLAY WINDOW
A. AL 1 BELL SYMBOL INDICATOR
B. SLEEP INDICATOR
C. RADIO MEMORY NUMBER/SLEEP
TIME INDICATOR
A
B C
D E
F
G
D. STEREO INDICATOR
E. AL 2 BELL SYMBOL INDICATOR
F. VOLUME HIGH/LOW INDICATOR
G. TRACK/NUMBER/TIME INDICATOR
UK-6
DC Ad apt er Tip
