background image

Press the 

MENU

 button.

'Station order'

 will be displayed.

Press one of the 

PREV/NEXT

 buttons until 

'DRC value'

is displayed.

Press the

SELECT

button. The current DRC level will be displayed on

line 1.

Press the

PREV/NEXT

buttons to select between the three values on

line 2 of the display.

When the required value is displayed press the 

SELECT

 button.

Language

There is only one option presented-

English.

Software Version

This is provided as a reference when servicing is required.

Press the 

MENU

 button.

'Station order'

 will be displayed.

Press one of the

PREV/NEXT

buttons until

'Sw version'

is displayed.

The version number will appear in line 1.

MANUAL TUNE

It is possible to manually tune to a specific channel/frequency and
add this to the station list.

This function can be used to assist the positioning the antenna to obtain
the optimum reception for a specific channel/frequency.

Press the 

MENU

 button.

'Station order'

 will be displayed.

Press the 

NEXT

 button to display

'Manual tune'

.

Press the 

SELECT

 button.

Use the 

PREV/NEXT

 buttons to select the channel/frequency.

Press the

SELECT

button. A rectangle will be displayed on first line of

the display. The position of this rectangle indicates the signal strength,
i.e. the further towards the right the greater the signal strength.

Adjust the position of the antenna to obtain the optimum signal strength.

Press the 

SELECT

 button to return to normal service.

Dynamic Range Control (DRC)

DRC adds or removes a degree of compression to compensate for the
differences in the dynamic range between radio stations. For example, a
station broadcasting popular music may have a high level of
compression applied since the emphasis is on a constant high listening
level, whereas a station broadcasting classical music will have little or
no compression as the listener requires all of the highs and lows in the
music to define the detail.

There are three levels of compression:

DRC0      No compression applied.

DRC1      Maximum compression applied (this is the default).

DRC1/2   Medium compression applied.

7A            188.92MHz

Summary of Contents for KH1000D







Reviews: