background image

TROUBLESHOOTING

The display shows 'NO SERVICES AVAILABLE'

Make sure that DAB coverage exists in your area.

Try adjusting the position of the antenna.

Poor reception

As with any radio service there will be areas of week signal that may
cause poor reception. Follow the instructions for Manual Tuning and
adjust the antenna while monitoring the signal strength until the
optimum signal is obtained. If reception is still poor try relocating the

     radio to another part of the room.

I cannot access secondary services

At the time of publishing this manual not many secondary services
are available in the UK. This will increase as more DAB stations start
broadcasting. If a secondar y ser vice station is available, the

     secondary indicator '>>' will be displayed next to the station name.

The display has gone blank or says 'SERVICE OFF AIR'

This may occur if a broadcaster changes the label of a service or
removes a label whilst you are listening to the station. The radio will

     try to re-tune to the station. Alternatively perform a SCAN.

I cannot hear the station I have selected

The station you are listening to is displayed on line 1. Line 2 shows
the selected option, but you have to press the SELECT button to

     tune to the selected station.

On the rear of the unit there are connections for 3
optional audio outputs

:

1)  Headphones for personal listening.
2) Left (L) and right (R) audio line out for connection to external

amplifier equipment.

3)  Optical output connection to extenal amplifier equipment.

Note: This product is exclusively available through Dixons Stores Group. In the

unlikely event of a problem with your product please return to the store where

your purchase was made.

SPECIFICATIONS:

Power Requirements:                       ~230V/50Hz
DAB Frequency Range (BandIII):     174 - 240 MHz
Usable Sensitivity:

92 dBm

FM Frequency Range:                      87.5 - 108MHz
Power Consumption:

15W

Rated Output Power:

1W x 2

Dimensions:                                      265(W) x 128(H) x 120(D)mm
Speaker:

4 Ohm

0870 600 1338

(UK customers only)

Calls charged at National Rate

...or visit our website at www.partmaster.co.uk

Partmaster Direct can provide accessories, spares, batteries and

replacement parts with Next

Day Delivery available upon request.

Partmaster

Direct

Please call:

Summary of Contents for KH1000D







Reviews: