30
GB
FM Operation
1.
Press the SELECT button on the unit or the remote control to
display the menu.
2.
Turn the SCROLL
control on the unit or press the SCROLL
buttons on the remote control to select FM mode, and then press
the SELECT button on the unit or the remote control.
3.
The display will show FM and the frequency.
Auto Scan
To search for an FM station, press the SEEK
buttons on the remote
control to start the auto scan. The display will show “Searching ...” . Once
a station has been found, the scanning will stop automatically.
Manual Scan
To search for FM stations manually, turn the SCROLL
control on the
unit or press the SCROLL
buttons on the remote control until your
desired frequency is reached.
With FM radio it may be necessary to fine tune each station by Turning the
SCROLL
control on the unit or pressing the SCROLL
buttons on the
remote control repeatedly. Each press will adjust the frequency by 0.05MHz. If
reception is still poor adjust the position of the aerial or try moving the radio
to another location.
Storing Stations
You can store up to 8 of your favourite stations to the memory. This will
enable you to access your favourite stations quickly and easily.
1.
To store a preset, you must first be
listening to the station that you would
like to save
2.
Press and hold the P1-P8 buttons on
the remote control. The station will be
stored and the “Assigned to Preset #”
will show on the display.
KHi340E_IB_GB_110520.indd 30
20/05/2011 1:42 PM