background image

English   

- 15 -

 Confi guration 

 You can confi gure the settings of your TV. Select 
Confi guration from Setup menu and press  “ 

OK

 ”  to 

view this menu. Press the  “

RETURN

”  button on the 

remote control to exit. 

 

 

  

  

   

  

Dolby D Digital

In the Configuration Menu, highlight the Dolby D item by 
pressing 

 or 

 buttons. Use the 

 or 

” 

buttons 

to set the Dolby D Digital as On or Off. If the channel that 
you are watching supports Dolby Digital,you can turn this 
setting on.

Hard of Hearing (* for EU countries only) 

 Use  “

” or “

” button to select Hard of Hearing and 

then press  “ ” or “ ” button to set this setting  as 
On or Off.

If the broadcaster enables any special signal 
concerning the audio, you can set this setting as On 
to receive such signals. 

 Favourite Mode 

 Use this function to enable or disable favourite 
mode. Press “ ” / “ ” button to set this function as 
on or off. 

 Channel List 

 Use “

” or “

” buttons to go to Channel List option. 

Use “ ” or “ ”  buttons to toggle Channel List Mode. 
If you select “TV Only”, with the “ ” or “ ”  buttons, 
you navigate through only TV channels. If you select 
“Radio Only”, with the “ ” or “ ”  buttons, you navigate 
through only radio channels.  If you select “Text Only”, 
with the “ ” or “ ”  buttons, you navigate through only 
text channels.  

Scan Encrypted 

Scan Encrypted Channel feature will always be ON 
after performing first time installation. When this 
setting is on, search process will locate the encrypted 
channels as well. If it is set as OFF manually, encrypted 
channels will not be located while in automatic search 
or manual search.

Use “

” or “

” button to select Scan Encrypted and 

then press “ ” or “ ” button to set this setting as 
On or Off.

 Receiver Upgrade 

 Over Air Download (OAD) 

 This feature helps to keep your TV updated. It works 

This feature helps to keep your TV updated. It works 
automatically  and  searches  for  new  information 

automatically and searches for new information 
when available. Note that this setting is inactive to be 

when available. Note that this setting is inactive to be 
modifi ed

modifi ed.. Please ensure that the TV is set to standby 
mode. The TV automatically powers up at 3.00 A.M. 
each day and searches for any new information which 
may be broadcasted and will download this to your 
receiver automatically. This operation will normally 
take approximately 30 minutes. 

  Note: Your TV may start in First Time Installation mode after 
OAD update.

 Parental Control 

 Use “

” or “

” buttons to go to Parental Lock option. 

Press OK button to enter the menu. A dialog box 
asking for the lock key will be displayed. The key is set 
to “0000” initially. Enter PIN. If it is incorrect, “Wrong 
Pin” OSD will be displayed. If it is correct, the Parental 
Control menu will be displayed: 

 

 

 Maturity Lock  (*)

 (*) If you set Country option as UK in the fi rst  time 
installation, Maturity Lock option will not be visible. 
This setting is available only for EU countries.

When set, this option gets the maturity information 
from the broadcast and if this maturity level is disabled, 
does not show video-audio. 

 Menu Lock 

 In menu lock you can set locking for all menus, or the 
Installation Menu to restrict access to these menus. 
If the menu lock is disabled, there will be free access 
to the menu system. Use  “

” or “

” buttons to go to 

Menu Lock option. Use  “ ” or “ ” buttons to choose 
Menu Lock Mode. 

  

DISABLED

  : All menus are unlocked. 

 

ALL MENUS

  : All  Menus are  accessible only with 

the correct lock key. So the user cannot add, delete, 
rename, channels, cannot set timers. 

 

INSTALLATION MENU

 : Installation menu is locked.

So the user can’t add channels. Changes will be 
updated after exiting ‘Confi guration Menu’.

 Set PIN 

Use “

” or “

” buttons to go to “Set PIN” option. 

Press  “

OK

”  to display the “Set PIN” window. Use 

numeric buttons to enter new pin number you will need 
to input your new pin a second time for verifi cation 
purposes.The factory default pin number is 0000, if 

00_MB45M_[GB]_1800UK_IDTV_NICKEL13_26856W_10065880_50157325.indd   15

00_MB45M_[GB]_1800UK_IDTV_NICKEL13_26856W_10065880_50157325.indd   15

11.12.2009   11:20:11

11.12.2009   11:20:11

Summary of Contents for L26HP04U




































Reviews: