background image

5-40

 

Performing Universal Volume Manager Operations

 

Hitachi Universal Storage Platform V/VM Universal Volume Manager User’s Guide 

7.

 

Verify the settings in the Preview dialog box. 

8.

 

Click 

Apply

 in the Path Operation window. 

The settings are applied to the local storage system and the Path Operation 

window is displayed normally. When an error occurs, an error message is 

displayed. Verify the details in the Preview dialog box. 

Restoring the Paths to the External Volume (Check Paths) 

You use the 

Check Paths

 command to resume using the cross-subsystem 

path which was stopped by the 

Disconnect Paths

 command. 

 

 

 

Note:

 

The path has to be in a status that can be restored.

 

To restore the path to the external volume: 
1.

 

Start Storage Navigator, and open the Path Operation window. 

2.

 

Make sure that Storage Navigator is in 

Modify

 mode. 

3.

 

Select one of the following from the drop-down list above the Path 

Operation tree. 

 

Fibre - Local Subsystem

: Displays the ports in the local storage 

system. Select 

Fibre - Local Subsystem

 to restore all the cross-

subsystem paths connected to the specified port in the local storage 
system. 

 

Fibre - External Subsystem

: Displays the WWNs in the external 

storage system. Select 

Fibre - External Subsystem

 to restore all the 

cross-subsystem paths connected to the specified WWNs (ports) in the 
external storage system. 

4.

 

Click 

Subsystem

 or the product name in the Path Operation tree. 

5.

 

Right-click the port or WWN that you want to restore in the Path Operation 

list. 

6.

 

Click 

Check Paths

 in the pop-up menu. 

The settings are displayed in blue and italics. 

7.

 

Verify the settings in the Preview dialog box. 

8.

 

Click 

Apply

 in the Path Operation window. 

The settings are applied to the local storage system and the Path Operation 

window is displayed normally. When an error occurs, an error message is 
displayed. Verify the details in the Preview dialog box.

 

Summary of Contents for MK-96RD626-07














































































































































































































Reviews: