73
QM00971-1
PICTURE menu
Item
Description
CONTRAST
OPTIMIZER
Turns on/off the CONTRAST OPTIMIZER function.
This function makes gradation of image more lively to improve
contrast and vividness.
ON
ó
OFF
• This function is disabled when the EDGE BLENDING function or
the PbyP / PinP function is enabled
.
• This function is disabled when HDR DETECT is enabled and HDR
signal is input.
• Even if this function is set to ON, this function may be disabled
depending on the PICTURE MODE setting. In that case, this item
cannot be selected from the menu.
DYNAMIC BLACK
Turn on/off the DYNAMIC BLACK function.
Configures the projector to automatically adjust the contrast of
the input image. When a dark video signal is input, the projector
dynamically adjusts the picture contrast.
ON
ó
OFF
• This function may not work correctly when analog signals contain
noise.
MY MEMORY
This projector has four memories for adjustment data (for all the
items of the PICTURE menu).
Selecting a function using the ▲/▼ buttons and pressing the ► or
ENTER
button performs each function.
SAVE-1
ó
SAVE-2
ó
SAVE-3
ó
SAVE-4
LOAD-4
ó
LOAD-3
ó
LOAD-2
ó
LOAD-1
LOAD-1, LOAD-2, LOAD-3, LOAD-4
Performing a LOAD function loads the data from the memory linked
in the number included in the function’s name, and adjusts the
picture automatically depending on the data.
• The LOAD functions whose linked memory has no data are
skipped.
• Remember that the current adjusted condition is lost by loading
data. To keep the current adjustment, save it before performing a
LOAD function.
• There may be some noise and the screen may flicker for a
moment when loading data. This is not malfunction.
• You can perform the LOAD function using
MY BUTTON
. See MY
BUTTON item in OPTION menu (
101
).
SAVE-1, SAVE-2, SAVE-3, SAVE-4
Performing a SAVE function saves the current adjustment data into
the memory linked in the number included in the function’s name.
• Remember that the current data being stored of a memory is lost
by saving new data into the memory.
