24
English
1
Set the nailing operation switch to FULL
SEQUENTIAL ACTUATION MECHANISM
(Nailing operation indicator is light in blue.)
(to set to FULL SEQUENTIAL ACTUATION
MECHANISM).
(Set the switching device to the nailing operation
indicator light in blue mode completely as
shown in the diagram. Otherwise, it will be set to
CONTACT ACTUATION MECHANISM.)
2
Position the nail outlet on the workpiece with
fi
nger o
ff
the trigger.
3
Depress the push lever
fi
rmly until it is completely
depressed.
4
Pull the trigger to drive a nail.
5
Remove
fi
nger from the trigger and lift the tool o
ff
the wood surface completely.
To continue nailing in a separate location, move the
nailer along the wood, repeating steps
2
-
5
as
required.
NOTE
Operations
3
and
4
should be done within
2 seconds of each other. If more than 2 seconds
pass after
3
, the Nailer will not work properly. If this
happens, retry from
3
.
3
4
Push lever
Trigger
Nailing
operation switch
Nailing operation
indicator (Light in blue)
(2) Continuous operation (Push lever
fi
re)
Using CONTACT ACTUATION MECHANISM
WARNING
●
To avoid double
fi
ring or accidental
fi
ring due
to recoil.
1)
Do not press the nailer against the wood
with excessive force.
2)
Separate the nailer from the wood as it
recoils after nailing.
1
Set the nailing operation switch to CONTACT
ACTUATION MECHANISM (Nailing operation
indicator is blink in blue.)
(to set to CONTACT ACTUATION MECHANISM).
(Set the switching device to the nailing operation
indicator blink in blue completely as shown in the
diagram. Otherwise, it will not operate properly.)
2
Pull the trigger with the Nailer o
ff
the workpiece.
3
Depress the push lever against the workpiece to drive
a nail.
4
Move the Nailer along the workpiece with a bouncing
motion.
Each depression of the push lever will drive a nail.
As soon as the desired number of nails have been driven,
remove
fi
nger from the trigger.
NOTE
Operations
2
and
3
should be done within
2 seconds of each other. If more than 2 seconds
pass after
2
, the Nailer will not work properly. If this
happens, retry from
2
.
Nailing operation
switch
Nailing operation
indicator (blink in blue)
2
4
Previously pull the trigger
WARNING
●
Keep your
fi
nger o
ff
the trigger except during
nailing operation, because serious injury
could result if the push lever accidentally
contacts you or others in work area.
●
Keep hands and body away from the
discharge area. This Hitachi nailer may
bounce from the recoil of driving a nail and
unwanted subsequent nail may be driven,
possibly causing injury.
000Book̲NR1890DC̲NA.indb 24
000Book̲NR1890DC̲NA.indb 24
2018/08/22 17:34:00
2018/08/22 17:34:00
