--- 21 ---
Remove the adhesive
fragments and apply oil to
the nail feeder, ribbon spring
and the nail rail.
<
Magazine>
Nail groove of the magazine
is abnormal (too wide, too
narrow, deformed or
damaged).
Magazine is abnormal
(deformed or damaged).
Nail feeder is abnormal
(deformed or damaged).
Ribbon spring is abnormal
(deformed, damaged or
fatigued).
Adhesive fragments are on
the nail groove of the
magazine or they need oil.
Foreign matter is found on
the guide face of the nail
feeder.
<Nails>
Magazine is not loaded with
specified genuine nails.
Problem
Possible cause
Inspection method
Remedy
9. TROUBLESHOOTING GUIDE
9-1. Troubleshooting and Correction
1) Nails cannot
be driven.
Check if the magazine is
normally loaded with
specified nails.
Check the nail feeding
section for abnormal
conditions (burrs, fatigued,
deformed, damaged).
Check if the nail feeder
operates smoothly in the
magazine.
Check if the nails (one strip)
move smoothly in the
magazine.
Check if nails (one strip) are
fed smoothly into the nail
injection port of the nose.
Use specified nails.
Remove the abnormal nails
and load the magazine with
normal nails.
Magazine is loaded with
abnormal nails (bent nails,
large or small round-head
nails, abnormal collation,
etc.).
Nail or collating band clogs.
Collating band is deforomed
or torn.
Repair or replace the
defecive part.
Repair or replace the
defective part.
Remove the adhesive
fragments.
<
Nose >
Nail inlet groove of the
nose is abnormal
(deformed, burrs or
damaged).
Adhesive fragments are in
the nail inlet groove.
Summary of Contents for NR 83A2
Page 46: ......