--- 29 ---
10-4. Disassembly and Reassembly of the Magazine Section
Deform Guard [80] by inserting
a flat-blade screwdriver.
Engaged.
Tools required:
Phillips screwdriver
Roll pin pullers (4 mm dia., 2.5 mm dia.)
Hex. bar wrench (4 mm)
Wrench M5
(1) Disassembly and reassembly of the magazine section
(a) Disassembly (See Fig. 15.)
Loosen the Hex. Socket Hd. Bolt M5 x 20 [100] and the Nylon Nut M5 [78] then remove the Sleeve [79].
Deform Guard [80] using a flat-blade screwdriver and disengage it from the Tail Cover [31].
Loosen the Machine Screw M5 x 25 [44] of the Body (B) [27]. Then the Magazine Ass'y [108] can be
removed.
Fig. 14
Summary of Contents for NV 83A2
Page 15: ... 12 Pushing Lever 54 Part NV 83A2 NV 83A Bent Welded Cover 105 ...
Page 46: ......