43
Flash of indicator
指示燈閃動
Alarm content
警報內容
Part to check
檢查部位
Solution
處理方法
•
If the above abnormal alarms occur, they may be caused by outside interference.
At that time, please press the Pause button to suspend the washing machine, then restart it. If the same alarms
occur, please stop the use and request repair.
若出現上述之外的異常警報,有可能是由外來干擾導致。
此時請按下暫停按鈕暫停運轉,然後重新
啟
動,若仍出現相同的異常警報,請停止使用並請專人修理。
Case
現象
Cause
原因
Before the repair request
Please recheck the following items
要求修理前
請再次檢查以下項目
Fail to running
不運轉
•
Is power cut?
是否停電
?
•
Does fuse or breaker blow?
保險絲或熔斷器是否燒斷
?
•
Can the power plug enter the socket properly?
電源插頭是否可靠地插入電源插座
?
•
Is the power switch on?
電源開關是否打開
?
•
Is the tap turned on?
水龍頭是否打開
?
•
Is the "Preset washing program" set? 30
是否設定了“預校洗衣程序”
?
30
•
Whether the "Start" button is pressed or not?
是否按下『
啟
動』按鈕
?
The lid is not locked
completely
(The lid is not completely
closed)
機蓋沒有完全鎖緊
(機蓋沒有完全關閉時)
•
Is there foreign substance under
the lid?
機蓋下有異物
?
Troubleshooting
排除異常
Restart operation
再次
啟
動運轉
If there is still
trouble, stop
using the unit
and request
repair.
若仍出錯,請停止
使用並請專人修理。
•
Press "Pause" button, and then
restart it.
按下暫停按鈕,然後重新
啟
動。
Lock of lid cannot be
unlocked
機蓋鎖緊無法解除
•
Is the lid closed?
機蓋是否已關閉
?
Fail to work
無法運轉
Close the lid.
關閉機蓋。