Chapter 4
[AH
・
・
・
PID
Target
value
Terminal
045
Operation
command
Chapter 4
[AH-71]
～
Code/Name
AH-71
PID1 output
・
Limits the output range of the PID.
limit is disabled.
Code/Name
AH-72
PID1 d
level
・
When the PID
output terminal function 045[OD] is activated.
Code/Name
AH-73
PID feedback compare
signal turn-off level
AH-74
PID feedback compare
signal turn-on level
・
If the PID feedback
output terminal function 046[FBV] is deactivated (OFF).
If it crosses
PID Output (%)
PID
Target
value
PID deviation
0%
Terminal
045[OD]
PID feedback
0%
Output
terminal
046[FBV]
Operation
command
Chapter 4
～
[AH-74
Code/Name
PID1 output variable
the output range of the PID.
limit is disabled.
Code/Name
deviation over
PID deviation pass over the
output terminal function 045[OD] is activated.
Code/Name
PID feedback compare
off level
PID feedback compare
level
feedback cross over the [AH
output terminal function 046[FBV] is deactivated (OFF).
under the [AH
PID Output (%)
deviation (%)
ON
feedback (%)
ON
4]
Range (unit)
0.00
～
100.00(%)
the output range of the PID. If [AH
Range (unit)
0.00
～
100.00(%)
pass over the±[AH
output terminal function 045[OD] is activated.
Range (unit)
PID feedback compare
0.00
～
100.00(%)
PID feedback compare
0.00
～
100.00(%)
cross over the [AH
output terminal function 046[FBV] is deactivated (OFF).
under the [AH-74] level, is activated (ON).
PID Output variable range
ON
ON
ON
Range (unit)
Initial value
100.00(%)
0.00
[AH-71]=0.00 the
Range (unit)
Initial value
100.00(%)
3.00
±[AH-72], the
output terminal function 045[OD] is activated.
Range (unit)
Initial
value
100.00(%)
100.00
100.00(%)
0.00
cross over the [AH-73] level, the
output terminal function 046[FBV] is deactivated (OFF).
74] level, is activated (ON).
Time(s)
[AH-71]
PID Output variable range
[AH-71]
Time(s)
[AH-72]
[AH-72]
Time(s)
[AH-73]
[AH-74]
4-24
Initial value
the
Initial value
the
Initial
value
100.00
0.00
73] level, the
output terminal function 046[FBV] is deactivated (OFF).
74] level, is activated (ON).
AH
enable
AH
level
AH
setting
AH
AH
detection
AH
level
・
For a shockless
made the target value,
・
In the case of a soft start, the acceleration time can be
set with [AH
AH
PID sleep trigger selection
AH
PID sleep start level
AH
PID sleep active time
AH
Setpoint boost before PID sleep
enable
AH
Setpoint boost time
AH
Setpoint boost value
AH
Minimum RUN time befor
sleep
AH
Minimum active time of PID
sleep
・
The PID sleep function temporally reduces the PID
output, achieving an energy saving state.
]
]
PID
operation
[AH
For parameter configuration
Code/Name
AH-75
PID soft start function
enable
AH-76
PID soft start target
level
AH-78
Acceleration time
setting for PID soft start
AH-80
PID soft start time
AH-81
PID soft start
detection enable
AH-76
PID soft start
level
For a shockless
made the target value,
In the case of a soft start, the acceleration time can be
set with [AH-78].
Code/Name
AH-85
PID sleep trigger selection
AH-86
PID sleep start level
AH-87
PID sleep active time
AH-88
Setpoint boost before PID sleep
enable
AH-89
Setpoint boost time
AH-90
Setpoint boost value
AH-91
Minimum RUN time befor
sleep
AH-92
Minimum active time of PID
sleep
The PID sleep function temporally reduces the PID
output, achieving an energy saving state.
[AH
PID
operation
[AH-76]
Output frequency
For parameter configuration
[AH
Code/Name
PID soft start function
PID soft start target
Acceleration time
for PID soft start
PID soft start time
start error
PID soft start target
For a shockless operation, base frequency×[AH
made the target value, with the [AH
In the case of a soft start, the acceleration time can be
78].
Code/Name
PID sleep trigger selection
PID sleep start level
PID sleep active time
Setpoint boost before PID sleep
Setpoint boost time
Setpoint boost value
Minimum RUN time before PID
Minimum active time of PID
The PID sleep function temporally reduces the PID
output, achieving an energy saving state.
[AH-80]
Abides by [AH-78] acceleration
Output frequency
PID feedback
PID Target value
For parameter configuration
[AH-75]
～
Range (unit)
00(Disable)/
01(Enable)
0.00
～
100.00(%)
0.00
～
3600.00(s)
0.00
～
100.00(s)
00(Disable)/
01(Enable: Error
02(Enable: Warning)
0.00
～
100.00(%)
operation, base frequency×[AH
with the [AH-80] output time.
In the case of a soft start, the acceleration time can be
Range (unit)
00(Disable)/
01(Low output)/
02([SLEP] terminal
0.00
～
590.00(Hz)
0.0
～
100.0(s)
00(Disable)/01(Enab
le)
0.00
～
100.00(s)
0.00
～
100.00(%)
0.00
～
100.00(s)
0.00
～
100.00(s)
The PID sleep function temporally reduces the PID
output, achieving an energy saving state.
78] acceleration
PID feedback
PID Target value
ON
For parameter configuration
～
[AH-92
Range (unit)
Initial
value
00
100.00(%)
100.00
3600.00(s)
30.00
100.00(s)
0.00
: Error)
02(Enable: Warning)
00
100.00(%)
100.00
operation, base frequency×[AH-76] is
80] output time.
In the case of a soft start, the acceleration time can be
Range (unit)
Initial
value
)/
terminal)
00
590.00(Hz)
0.00
0.0
00(Disable)/01(Enab
00
100.00(s)
0.00
100.00(%)
0.00
100.00(s)
0.00
100.00(s)
0.00
The PID sleep function temporally reduces the PID
Time
92]
In the case of a soft start, the acceleration time can be
Summary of Contents for P1-00041HFEF
Page 6: ...0 5 Contents Contents Memo ...
Page 42: ...2 26 Chapter 2 Installation and Wiring Memo ...
Page 129: ...Index Index 3 memo ...
Page 130: ...Index Index 4 memo ...
