SAFETY SUMMARY
1
ENG
L
IS
H
1.
SAFETY SUMMARY
Ö
DANGER:
DO NOT pour water into the remote control switch (hereafter called “controller”).
This product is equipped with electrical parts.
If poured, it will cause a serious electrical shock.
Õ
WARNING:
DO NOT perform installation work and electrical wiring connection by yourself. Contact your
distributor or dealer of HITACHI and ask them for installation work and electrical wiring by
service person.
CAUTION:
-
DO NOT install the indoor unit, outdoor unit, controller and cable at such places as;
-
Where there is oil vapor and the oil is dispersed
-
Where the hot springs are near (in a sulfuric environment)
-
Where generation, flowing, staying or leaking of flammable gas is detected
-
Where the sea is near (in the salty environment)
-
An acid or alkaline environment
-
DO NOT install the indoor unit, outdoor unit, controller and cable within approximately
3 meters from strong electromagnetic wave radiators such as medical equipment.
In case that the controller is installed in a place where there is electromagnetic wave
radiation, shield the controller and cables by covering with the steel box and running
the cable through the metal conduit tube.
-
In case that there is electric noise at the power source for the indoor unit, provide
a noise filter.
2.
INSTALLATION WORK
2.1.
SELECTION OF INSTALLATION PLACE
Select a suitable place for handling and determine the installation place of the controller
with the customer’s acceptance.
Do not install the controller at such places as:
-
Where children can touch
-
Where the air from the air conditioner is directly discharged
2.2.
BEFORE INSTALLATION
This packing contains the following parts:
-
Remote Control Switch (Q’ty: 1, For Operation Control)
-
Screw<M4x16L> (Q’ty: 2, For Fixing the Holding Bracket onto the Wall)
-
Ring Core (Q’ty: 1)
-
Band (Q’ty: 1, For Fixing Cable to Ring Core)
-
Cable (20cm)
