4-4
●
Setting the User Environment
When the print target detection signal
turns ON
4.2 Setting the User Environment
(1) Overview
Setup item
Description
Repeat print
sensor mode
Default
¡
Sets the conditions under which printing is
performed a preselected number of times at
predefined intervals.
Signal ON
period
While the print target detection
signal is ON
Signal ON
period
OFF - ON
transition
¡
Invalid if the repeat count is 0.
Reverse
direction
printing
Disable
¡
Set whether reverse direction printing is to
be performed or not.
When character orientation is normal (0, 1):
Prints in reverse direction when the
reverse direction printing signal is
OFF; and forward when it is ON.
Prints in forward direction when the
reverse direction printing signal is
OFF; and in reverse when it is ON.
OFF=ABC
OFF=CBA
OFF=ABC
Reverse direction
printing signal
OFF
ON
123
When OFF
When ON
123
(The arrow shows
the order of printing)
Print target
detector signal
ON
ON
OFF=CBA
OFF
ON
123
When OFF
When ON
123
ON
ON
(The arrow shows
the order of printing)
Reverse direction
printing signal
Print target
detector signal
When character orientation in the print
specifications screen is inverted (2, 3), print
direction (forward, reverse) will also be
inverted by the above specifications.
Summary of Contents for PXR-D
Page 319: ...3S23L1307 3B PXR D E7 HEC ...