7-35
●
Excitation Setting Adjustment
The "Excitation V update" screen then opens.
1
2
3
4
5
6
7
8
9
0
Excitation V update
2011.07.07 12:45
Excitation V-ref.
[
1
1
]
(
0〜19
)
Ref. ambient temperature
23
(
℃
)
Automatic update
[
2
] (0: disable 1: Decrement 2 :
Increment
)
Incremental change [
1
] (1-9)
Print trigger source [
2
] (1: Button input 2:
Sensor
)
Print data [
2
] (1: For test 2:
Data to be displayed
)
Perform nozzle property test and find the optimum excitation
voltage value.
Back
←
→
↑
↓
Nozzle test
Decre-
ment
Incre-
ment
Status : Standby Com=0
Manual
Start
up
Shut
down
Comm
On/Off
Show
cursor
If the cursor is not
displayed, press
Show cursor .
3
Set up the "Print trigger source".
Set up the timing for performing printing.
1: Button input
→
Print on "Start printing" on the control panel.
2: Sensor
→
Print on a sensor signal.
4
Verify that the printer is in "Standby" state. Press Nozzle test .
The "Nozzle property test" screen then opens.
Nozzle property test
2011.07.07 12:45
Excitation V-ref.
[
11
]
(
0〜19
)
Ref. ambient tempereture
23
(
℃
)
Automatic update
[
2
] (0: disable 1: Decrement 2 :
Increment
)
Incremental change [
1
] (1-9)
Print trigger source [
2
] (1: Button input 2:
Sensor
)
Print data [
2
] (1: For test 2:
Data to be displayed
)
Excitation V-ref. is printed on the print target.
[
nn・・・・・・
]
Printing starts upon signal from sensor.
↑
↓
Abort
Decre-
ment
Incre-
ment
Status : Ready
Com=1
Print data can be set.
1: For test: Print will be performed automatically under the following conditions:
Number of lines
: 1 line
Character size
: 12 X 16 dots
Inter-character space
: 1
Character height
: 99
Character width
: 5
Ink drop use percentage : 1/3
Print description
:
■■
nn123ABC
(nn shows excitation V-ref..)
2: Data to be display: Print will be performed in the print condition, and with
content, currently set.
Summary of Contents for PXR-D
Page 319: ...3S23L1307 3B PXR D E7 HEC ...