WARNING
Safety Precautions
(Continued)
¡
While the printer is operating, do not look into the ink ejection hole in
the end of the print head.
I
nk or makeup ink may enter your eyes or mouth or soil your hands or clothing.
If any ink or makeup ink enters your eyes or mouth, immediately flush with warm
or cold water and consult a physician.
¡
Ensure that no welding operations are performed within 5 m of the
printer.
The welding current may flow to the control section in the printer and cause a
circuit board or printer malfunction. Also, the flame generated by welding may
cause a fire.
¡
Before servicing the printer, be sure to stop the ink ejection.
Because ink or makeup ink may splash into your eyes or mouth or onto your
hands or clothing. If any ink or makeup ink enters your eyes or mouth,
immediately flush with warm or cold water and consult a physician.
¡
If an earthquake, fire, or other emergency occurs while the printer is
engaged in printing or just turned on, press the ON/OFF power switch
to turn off the power.
¡
The printer must be managed in compliance with all appropriate
regulations.
Read and understand the appropriate Material Safety Data Sheet (MSDS) before
using any ink or makeup ink.
¡
Only use Hitachi-approved consumables and periodic replacement
parts.
Using products that are not designated by Hitachi may lead to malfunction or
failure. Such malfunction or failure will not be covered by the warranty.
¡
Warning for Mercury
H
g
-- THE LAMP IN THIS PRODUCT CONTAINS MERCURY. RECYCLE OR
DISPOSE OF ACCORDING TO APPLICABLE ENVIRONMENTAL LAWS.
For Recycling and Disposal information, contact your government agency, the
Electronic Industries Alliance at www.eiae.org, and/or www.lamprecycle.org (in
the US), or the Electronic Product Stewardship Canada at www.epsc.ca (in
Canada). For more information, call 1-800-HITACHI (1-800-448-2244) (in the
US).
( )
Summary of Contents for PXR-D
Page 319: ...3S23L1307 3B PXR D E7 HEC ...