●
Startup 2-9
Ejecting the ink using the control menu
The confirmation
screen opens.
1
Manual Control Menu
The manual control menu
appears.
2
3
Start
up
Shut
down
Manual
Prev.
col.
Next
col.
=====
Maneal Control Menu
=====
Eject ink: Ejects ink while applying no deflection voltage.
No-cleaning stop: Stops ink ejection without cleaning.
Eject ink
No-cleaning
stop
Cancel
The ink jet will be turned ON.
Solution To turn the ink jet ON, press [Ready].
Ready
Cancel
=====
Ink Jet Startup Confirmation
=====
Press the Ready key.
Press the Eject ink key.
Press the Manual key.
Comm
On/Off
¡
You can abort the operation by pressing the Cancel key from either the
"Manual Control Menu" screen or the confirmation screen.
¡
Even if you perform the above ink ejection procedure with the print head
cover installed, the printer does become ready for printing (but goes into
the standby state).
¡
When the following setup ( 1 - 3 ) is employed, the printing method is
automatically switched to the single scan control. You should bear in mind
that the print quality varies with the employed printing method particularly
when the ink drop use percentage is 1/1 or 1/2. To determine which printing
method is currently selected, view the printing specifications screen.
1
When differing print formats are designated for some or all setup items
2
When differing line count settings are employed for some or all columns
3
The ink drop use percentage is changed to 1/5 to 1/16.
¡
Perform the following setup to make prints by the printing method of line
spacing control (interlaced).
1
Ensure that the same print format is employed for all items.
2
Ensure that the same line count setting is employed for all columns.
3
The ink drop use percentage is 1/1 to 1/4.
Perform overall column setup. The format for the first item is then
applied to all the other items so as to provide line spacing control
setup. When making a 1-line print, the single scan control
predominates even if you perform steps 1 through 3 .
Precautions to be observed when changing the printings,
print format, or print line setup data
This feature is used to eject the ink from the nozzle with no intention of
printing (for maintenance purposes only).
Press the Manual key to make prints on paper.
Summary of Contents for PXR-D
Page 319: ...3S23L1307 3B PXR D E7 HEC ...