●
Setting Print Format 3-8
Guard
bar
Units
position
of Prefix
code
First 5 digits of
the input data
Center
bar
Check
code
Next 5 digits of
the input data
Guard
bar
Left barcode portion
Right barcode portion
5 digits
5 digits
1 digit
¡
When inserting an EAN-13 bar code, you must enter a two-digit code in the
EAN prefix area.
¡
The input data must be 10 digits. If the input data is less than 10 digits, the
"No print contents" fault will happen.
¡
The guard bar, center bar and check code are automatically added.
Notice of inserting an EAN-13 bar code
¡
When alphabet character has been set to the upper limit value, if Code set
C of Code 128 is set, all characters in the item will be replaced with invalid
characters.
¡
The start and stop codes are automatically added.
¡
Set as shown below for print item to which DM is to be set:
(i) Number of lines: 1 line
(ii) Character size: 5x8, 12x16, 18x24
¡
Set barcode type to "DM" on the print format screen, and select the size.
Data matrix: Type of size and maximum character number
¡
Input characters within the specified digit number for print item to which
barcode has been set. If characters exceed ten digits, input across multiple
items.
¡
When alphabet letters and numerals occur together,the number of characters
which can be coded will vary depending on character array.
¡
When "DM8x32" is used, set item "character size 1"on the user environment
setup screen to "5x8".
Notice of DM code is used
¡
With multiple line printing, only one "Code 128" can be set to the same line.
If two or more "Code 128"s are set to the same line, "Barcode incorrect 2" error will
occur.
Notice of Code 128 is used
5X8
8X32
20
10
10-19
Character size
DM size
Maximum
character
number
Numeral only
Alphabet only
Alpha-numeral
12X16
16X16
24
12
12-23
16X36
64
32
32-63
16X48
98
49
49-97
18X24
18X18
36
18
18-35
20X20
44
22
22-43
22X22
60
30
30-59
24X24
72
36
36-71
Summary of Contents for PXR-D
Page 319: ...3S23L1307 3B PXR D E7 HEC ...
