33
VARIOUS FUNCTIONS
Door Alarm
If any door is kept opened for 1 minute or more, it is notified with sound or light.
Door Alarm function is installed in Refrigerator Compartment, Ice Compartment, Upper and Lower Selectable Compartment. (not installed in Freezer Compartment)
●
While the indicator lamp is blinking on the display area, the Control Panel remains inactive upon touching. Close the door before starting operation.
●
Door alarm rings after 30 seconds when the door has been opened only in case the power “Energy Saving” mode set. However the indicator blinks
after 1 minute of the opening.
Duration when door is open
1 minute
2 minutes
From 3 minutes onward
Alarm sound
Long beep (3 beeps)
Long beep (5 beeps)
Long beep (continuously), Louder
Display area
Blinking
Blinking
Blinking
For operation
Light ON
Light ON
Light ON
Notice
Door Alarm and volume adjustment of the operation sound
Touch
button on the Control Panel to turn
on the indicator lamp.
Press down
button for 3 seconds or more
until the preset sound is heard.
The volume level of the operation sound is changed from “Standard” to “Louder” or
“Sound off” . Repeat the change of settings to set the operation sound you like (see
the table shown below). The sound is set to “Standard” at the time of purchase.
1
2
3
4
●
It is impossible to adjust the volume level of
either door alarm or operation sound only.
●
When the Door Alarm is disabled, characters
on the Control Panel no longer blink.
●
Even if the volume level is set to “Sound
off” , the operation sound of the “Ice Maker
Cleaning” alarm is raised and is heard.
●
When connecting/disconnecting the power
plug or after recovering from electric power
failure, it will return to the standard setting
where the Door Alarm sounds.
Notice
You can set the sound level of the alarm louder or no alarm sound.
Volume level
Standard
Louder
Sound off
Standard
Preset sound
−
2 long beeps
Long beep
2 beeps
(At the time of purchase)
Locking the Control Panel
Touch
button on the Control Panel to turn
on the indicator lamp.
All indicator lamps turn on, and then the current settings are displayed.
Press down
button for 3 seconds or more
until the preset sound is heard.
Lock of the Control Panel is changed to “On” or “Off” .
The locking of the Control Panel is set to “Off” ( “
” is unlit) at the time of purchase.
1
2
●
When connecting/disconnecting the power
plug or after recovering from electric power
failure, lock of the panel for operation may
be released.
●
The indication is turned off after about 40
seconds for energy saving. This setting is
maintained until it is released.
Notice
Disenabling operations can prevent erroneous operations or misuse by children.
When this indicator lamp
(Lock of the Control Panel) is illuminated, any other
portion of the Control Panel will not be activated by touching it.
Setting of the Control Panel's lock
“On”
(locked)
“Off”
(unlocked)
“
indicator lamp”
On
Off
Preset sound
Long beep
2 beeps
Open the Upper Selectable Compartment door
Close the Upper Selectable Compartment door