8
ECO Monitoring Sensor
The controller section is displayed automatically only when the refrigerator is used and provides guidance in a user-friendly manner.
when nobody is near the refrigerator, control panel is not displaying
Lamp lights off.
Nobody else
When somebody comes to the front of refrigerator in ECO monitoring
zone(about 80 cm.), control panel is displaying automatically.
Lamp lights on.
When somebody approach
When the ECO Monitoring Sensor does not work. You can light up the touch screen button as follows
● Touch any on button area ( water ice dispenser or control area)
● Push the water / Ice dispenser
● Open any door.
Notice
80 cm.
ECO Monitoring Sensor
110 cm.
How to Use Glass Touch Panel and ECO Monitoring Sensor (Continued)
● Avoid placing the refrigerator in the hallway or areas where the most peoples walk through it.
Caution
● ECO Monitoring Sensor can detect people near refrigerator only.
● If the sensor cover dirty may cause sensor error. Always clean it with dry cloth.
● Do not put any things in the detecting area.
●
The initial temperature setting of the refrigerator compartment is level 3, and one of the freezer compartment is level 3.
.
●
The temperatures displayed on the control panel, are targetted temperatures, and may not be actual. The actual temperature is subject to food and ambient conditions.
The display is indicating the status of temperature setting.
For normal use.
When storing neither
frozen food nor ice cream.
When making ice quickly or making
frozen food quickly. Or, a surrounding
temperature is high and the Freezer
compartment is not cold enough.
Freezer Compartment
( Sound “ Pi ” )
( Sound “ Pi ” )
( Sound “ Pi Pi ” )
Press “Select” button
“ Freezer ” lamp light
is on.
Press “
T
emp.” button
to setting a temperature
The display is indicating the status of temperature setting.
When the food is too cold
For normal use.
When cooling food more
coldly or quickly
Refrigerator Compartment
( Sound “ Pi ” )
( Sound “ Pi ” )
( Sound “ Pi Pi ” )
Press “Select” button
“ Refrigerator ” lamp
light is on.
Press “
T
emp.” button
to setting a temperature
Normal
Coldest
Cold
Coldest
Normal
Cold
●
Temperature Control
