42
ICE COMPARTMENT (AUTOMATIC ICE MAKER)
Ice Compartment
Water Supply Tank
(Approx. 1.0 L)
(Return to the original position after use.)
Ice Case
Remove water supply
tank.
Open the water supply
cover and add water.
※
Do not pour water beyond the
Container-full line.
Water supply
cover
Container-full line
1
2
4
3
Ice scoop
Ice full line
Ice storage space
Press “ Ice Maker ”
button to activate
“ On ” indicator.
“ On ” mode is set at factory
setting.
Ice-making starts automatically.
●
When ice cubes reach the
Ice full line
, the automatic ice-making function is suspended.
The function automatically resumes when ice gets low.
●
When the Ice Case contains no ice cube, you may hear a large sound when ice cubes fall from the Ice Tray.
5
Ice Compartment
How to make Ice
Perform “ Ice Maker Cleaning ” when making ice for the first time or when it is not used for more than one
week.
Pg.51
〜
53
Container-full
line
Add water line
Control Panel
Ice Making Buttons
Automatic Ice Maker
Ice tray
“ Water ”
indicator lamp
Display
Ice Making
button
Light ON
Press it
MINERAL
WATER
Tea
JUICE
●
WARNING: Fill with potable water only.
●
Water for ice making is according to your drinking standard.
Quality of tap water may vary in different countries.
Please check and verify with your local authority.
●
Change water and clean the container at least once a week
for hygiene purposes.
Pg.52
●
If the ice made of mineral water containing a lot of mineral
ingredients is put into water, white powder may appear, this is
due to mineral ingredients and is harmless.
●
The following type of liquid are easily contaminated with bacteria.
Please wash the container usually once every 3 days.
●
Do not use the following beverages as they may cause
malfunction, deformation or sticking ice.
Mineral water
(Hardness: 100mg / L or less)
Juice drink
Sports drink
Carbonated drink Tea
Filtered water or
boiled water
Well water
(Required to satisfy the appropriate
water quality standard)
Request
19
Replace the water
supply tank.
Push it straight beyond the
“ Container set position ” line
completely.
※
Water may spill out if the
water supply tank is inclined.
Wipe off spilled water immediately.
If the water supply tank is not pushed
all the way in, ice cannot form.
Container set position
Push it all the way
to the back.