67
Vacuum Compartment
Once a month
Remove the vacuum compartment
gasket from the Vacuum Case.
Grasp the tab of the vacuum
compartment gasket on the
observer's upper right and
remove it by hand
carefully.
When the Vacuum Compartment Gasket is dirt
Rinse dirty portion in water using
a soft sponge, etc.
※
Do not use the detergents, etc.
Wipe off excess moisture with a
dry cloth and dry it out naturally.
Wipe off dirt in the vacuum
compartment gasket
mounting groove.
Attach the vacuum compartment gasket.
1
2
3
4
5
Tab
Pull out the Vacuum Case.
For how to remove,
Pg.70
Be sure to remove foods contained in the Vacuum Case.
Wipe off following parts with a soft
cloth which is steeped in lukewarm
water.
※
Do not use the detergents, etc.
Attach the Vacuum Case.
For how to attach,
Pg.70
1
2
3
Loosened vacuum compartment gasket or loose-fitting door of the
Vacuum Case may cause the vacuum state unable to keep well.
●
Wipe the ceiling of the compartment (platinum catalyst
and LED light) gently. Failing to do so may cause damage.
●
If detergents and others except lukewarm water are used
to clean the vacuum compartment gasket, the vacuum
compartment gasket may be damaged, deformed or
change in color, which may cause the vacuum state
unable to keep well.
Request
Groove for attaching the vacuum compartment gasket.
Vacuum Container
Vacuum Compartment
Gasket seat
Aluminum Tray
Vacuum compartment gasket
●
Make sure that water never splash to the Auto Drawer unit. Otherwise, it may cause malfunction.
●
Do not disassemble the Auto Drawer unit. Otherwise, it may cause injury and/or malfunction.
●
Exercise caution not to move the linkage section. Failing to do so may cause a failure.
Caution
Auto Drawer
Clean the auto door unit when food falls onto or is caught in the upper part of the auto door unit and when liquid is deposited on the auto door unit.
Unplug the power plug.
Remove each case of the Lower Freezer or the
Vegetable Compartment.
Pg.71
Remove all foods which drop or are caught in.
Wipe off deposited liquid using a soft and dry cloth.
1
2
3
4
●
Make sure to disconnect the power plug from
the power outlet before starting maintenance to
avoid injury.
Warning
Auto Drawer Unit
Linkage section
Align the vacuum compartment gasket tab with the notch of
the mounting groove.
R-ZX740K type
Align the indentations of the
gasket with the projection
(6 locations) of the case and
attach firmly.
R-WX670K type
R-WX620K type
Align the hollows of the
gasket between the
projections (6 locations) of
the case and attach firmly.
Tab
R-ZX740K type
R-WX670K type
R-WX620K type
Notching of the mounting groove
Locations of the projections of the case
Projection of the case
Projection of the case
Fins
Hollows in the gasket
M
AIN
TE
NA
NC
E
BB0055761T_R-ZX740KN_A.indd 67
19.10.4 2:42:11 PM
