– 26 –
– 26 –
H
SI
L
G
N
E
■
How to select Mode A or Mode B of WEEKLY TIMER setting.
1. Press
(WEEKLY) button.
and
blink on the display.
(Normally Mode A will blink first).
2. Press
(WEEKLY) button again.
and
blink on the display.
3. Select Mode A or Mode B. Press
(SEND) button while directing the
remote controller towards the indoor unit for about 3 seconds. Timer lamp
on the indoor unit will blink rapidly.
After beep sound emitted from indoor unit, TIMER lamp will light up.
Please ensure that the TIMER lamp lights up.
This indicates that Mode A or Mode B selection and active WEEKLY TIMER
have been confirmed.
■
Setting non-active WEEKLY TIMER .
1. Direct the remote controller towards the indoor unit and press
(CANCEL) button.
Beep sound will be emitted from indoor unit and TIMER lamp will be OFF.
Reservation indication on remote display will also disappear.
This indicates that non-active WEEKLY TIMER has been confirmed.
●
To activate back the setting of WEEKLY TIMER , repeat the steps for
"How to select Mode A or Mode B of WEEKLY TIMER setting".
NOTE
●
When setting ONCE TIMER, operation of WEEKLY TIMER is interrupted. After ONCE TIMER operation
is complete, WEEKLY TIMER operation will be activated.
●
When ONCE TIMER is cancelled, operation of WEEKLY TIMER is also cancelled. Need to set WEEKLY
TIMER operation for activation.
●
After auto restart, WEEKLY TIMER operation is cancelled. Need to set WEEKLY TIMER operation for
activation.
1
2
1
WEEKLY TIMER OPERATION
Step 2: Select Mode A or Mode B and activate or deactivate WEEKLY TIMER.
3
– 27 –
H
SI
L
G
N
E
■
How to copy and paste.
Editing the reservation schedule is easy by copying data from one day to
another day.
1. Press
(WEEKLY) button to select Mode A or Mode B.
2. Press
(WEEKLY) button for about 3 seconds to start editing the
reservation schedule.
3. Press
(DAY) button to select a day of the week to copy.
4. Press
(COPY/PASTE) button. Then "PASTE" blinks on the display.
* Press
(CANCEL) button to cancel the COPY mode. Normal
setting mode is activated.
5. Press
(DAY) button to select a day of the week to paste.
6. Press
(COPY/PASTE) button one more time to paste.
only
blinks on the display.
7. To continue copying to other days, press
or
or
or
.
Then start from step 3.
8. After copy and paste completed, press
(SEND) button while
directing the remote controller towards the indoor unit for about 3 seconds.
Timer lamp on the indoor unit will blink rapidly.
After beep sound emitted from indoor unit, TIMER lamp will light up.
Please ensure that the TIMER lamp lights up.
If TIMER lamp does not light up, Press
(SEND) button again.
●
Reservation data will not change if
(SEND) button is not pressed.
Step 3: Copy and cancel the reservation schedule.
NOTE
●
If there is no reservation data, copying data from one day to another day cannot be done.
1
2
3
4
5
6
8
WEEKLY TIMER OPERATION
