MODE
ON/OFF
FAN
TURBO
TEMP
MUTE
LIGHT
SLEEP
TIMER
ON
ECO
IFEEL
CLOCK
CLEAN
TIMER
OFF
Used to set or cancel Economy Mode operation.
Used to set the CLEAN function.
The remote controller transmits signals to the system.
Remote controller
1
2
3
13
4 5
6
12
11
7
8
9
10
SWING BUTTON
FAN BUTTON
ROOM TEMPERATURE
SETTING BUTTONS
SLEEP BUTTON
LIGHT BUTTON
CLOCK BUTTON
ON/OFF BUTTON
TURBO BUTTON
MODE BUTTON
TIMER ON/OFF BUTTON
Used to stop or start vertical adjustment
louver swinging and set the desired up/down
airflow direction.
Used to select fan speed in sequence auto, high, medium or low.
Used to set or cancel Sleep Mode operation.
When you press this button, all the display of
indoor unit will be closed.
Used to set the current time.
Used to start or stop the fast cooling.(Fast cooling operates at high
o
fan speed with 16C set temp automatically).
The appliance will be started when it is energized or will be
stopped when it is in operation, if you press this button.
Press this button to select the operation mode.
Used to set or cancel the timer operation.
Remote controller
Indication symbols on LCD:
Note: Each mode and relevant function will be further specified in following pages.
Signal transmit.
Dry indicator
Fan only indicator
Heating indicator
Cooling indicator
Higher fan speed
High fan speed
Medium fan speed
Low fan speed
Lower fan speed
Display temperature
Display set timer
Display current time
Auto fan speed
Smart indicator
ON
OFF
Used to adjust the room temperature and the timer, also real time.
Sleep indicator
16
15
MUTE BUTTON
Press it once,the MUTE
function will be started.
Press it again, the MUTE function will be shut off.
17
15
IFEEL BUTTON
Used to set IFEEL mode operation. Press it once,
the IFEEL function will be started. Press it again,
the IFEEL function will be shut off.
If the IFEEL function can't be shut off, please try
to press this button about 5 seconds.
Advice to put the remote controller in the place
where the indoor unit receive signal easily.
Advice to cancel the IFEEL mode so as to save
energy when stopping the air conditioner.
ECO BUTTON
CLEAN BUTTON
14
Used to stop or start Horizontal adjustment
louver swinging and set the desired left/right
airflow direction.
SWING BUTTON
1
indicator
Mute
Economy indicator
Ifeel
Lock
Nanoe indicator
Turbo indicator
Airflow up and down
indicator
Airflow left and right
indicator
15
4
10
10
13
13
3
3
1
1
2
2
6
6
5
7
4
14
17
17
11
11
12
12
9
5
14
8
7
9
16
16
8
15
TEMP
LOCK
Press them together for 3 seconds to start or stop
.
LOCK
operation
+
12
11
R
TY2
