〈
INDOOR UNIT
〉
MODEL RAS-E10H2
1. Front Panel
(1)Pull up the washable panel by holding it at both
lower sides with both hands.
Fig. 1
(2)When the panel opens full, push the inner part
of the right arm into the inside and pull the panel
forward while closing it gradually.
adually
adually
Fig. 2
2. Front cover
(1)After removing two screws, pull the center of
the front cover forward and release the claws.
(2)Hold the front cover at both lower sides and
pull them forward to remove.
Fig. 3
Indicating P.W.B.
Control P.W.B.
Support hook
P.W.
P.
P. B. and Indicating P.W.B.
(1)Remove each connector from the lead wire.
P.W.B.
(3)Pull the support hook at the upper side of the
indication lamp of the Indicating P.W.B.
Fig. 4
Procedure for Disassembly and Reassembly
and pull out the P.W.B. forward.
(2)Remove the four P.W.B. supports from the control
未
Lower bearing cover
Cabinet
Upper bearing cover
Radiation fin fixing screw
P.W.B. fixing screw
- 94 -
