background image

– 7 –

AUTOMATIC OPERATION

The device will automatically determine the mode of operation, HEAT or COOL depending on the current 
room tem

perature. T

he selected mode of operation will change when the room temperature varies. 

 

As the settings are stored in the memory in the remote controller, 
you only have to press the 

 (START/STOP) button next time.

Press the MODE selector button so that the display indicates 
the 

 (AUTO) mode of operation.

 

When AUTO has been selected, the device will automatically 
determine the mode of operation, HEAT or COOL depending 
on the current room temperature.  However the mode of 
operation will not change when indoor unit is connected 
to multi type outdoor unit.

  If the mode automatically selected by the unit is not 

satisfactory, manually change the mode setting (HEAT, 
DEHUMIDIFY or COOL).

1

START

STOP

VARIOUS FUNCTIONS

 Auto Restart Control

  If there is a power failure, operation will be automatically restarted when the power is resumed with 

previous operation mode.

  (As the operation is not stopped by remote controller.)

  If you intend not to continue the operation when the power is resumed, switch off the power supply.

 

When you switch on the circuit breaker, the operation will be automatically restarted with previous operation 
mode.

  Note: 1. If you do not require Auto Restart Control, please consult your sales agent.
   

2. Auto Restart Control is not available when Timer or Sleep Timer mode is set.

Press the 

 (FAN SPEED) button to select AUTO, HIGH, MED, 

LOW or SILENT.

Press the 

 (START/STOP) button.

Operation starts.
Press the button again to stop operation.

2

Set the desired FAN SPEED with the 

 (FAN SPEED) button (the 

display indicates the setting).

       

 (AUTO)     

 

(HIGH)     

(MED) 

 
 

 (SILENT)         

 (LOW) 

RAD-18-25-35-50NHA2 (EN2)   7

RAD-18-25-35-50NHA2 (EN2)   7

5/14/14   10:34 AM

5/14/14   10:34 AM

Summary of Contents for RAD-18NHA2























Reviews: