239
RHUE-(3~6)A(V)HN
SMGB0066 rev.0 - 12/2009
Servicing
Service Manual
9
9.1. rHUE-(3~6)A(V)Hn
9.1.1. removing service cover
Remove the main parts according to the following
procedures.
note
Screws are represented as black points in the figure
-
besides.To reassemble, perform the procedures in reverse.
To prevent contamination of the refrigerant with water or
-
foreign particles, do not expose open pipes to atmosphere
for long periods.
If necessary, seal pipe ends using caps or tape.
-
Remove the nine (9) fixing screws of the upper cover.
1.
Remove the fourteen (14) fixing screws of the front
2.
cover.
Slide the service cover downward and remove it.
3.
Pay attention of not falling off the service cover.
4.
9.1.2. removing air outlet grille
Remove the eight (8) fixing screws.
1.
Lift the air outlet grille holding the lower parts.
2.
Release the extruded hook of the air outlet grille from
3.
the shroud.
Air outlet
grille
Screws
Screw
