manualshive.com logo in svg

Hitachi RX2, Instruction Manual

The Hitachi RX2 is a cutting-edge device designed to meet all your needs. Enhance your user experience with our comprehensive Instruction Manual, available for free download at 88.208.23.73:8080. Get familiar with every feature and function effortlessly with our user-friendly manual, ensuring a seamless and hassle-free experience.

Share
Download
background image

●

Contents  3

3

5. MAINTENANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

5.1 Confirm the Unit information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
5.2 Monitor operational status  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
5.3 Print without any sensor signal (Test print, Start printing). . . . . . . . . . . . . . 5-4
5.4 Confirm the registered software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
5.5 Checking the functions that can be performed . . . . . . . . . . . . . . . . . . . . . . 5-6

6. ENVIRONMENT SETUP

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

6.1 Set the user environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
6.2 Set the date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
6.3 Set up the touch screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10
6.4 Changing the user  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12
6.5 Setting password for each user  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14

7. AUXILIARY FUNCTIONS

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

7.1 Manage messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2

7.1.1 Managing stored messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-2
7.1.2 Changing the message name  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-4
7.1.3 Deleting stored messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-5
7.1.4 Changing message number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-6
7.1.5 Changing the group to which a message belongs . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-9

7.2 Manage group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10

7.2.1 Manage group  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-10
7.2.2 Change group name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-11
7.2.3 Delete a stored group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-12
7.2.4 Change group number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-13

7.3 Creating a user pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-15

7.3.1 Creating and saving user pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-15
7.3.2 Selecting a user pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-19
7.3.3 Editing a pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-20
7.3.4 Creating a user pattern of a free size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-23
7.3.5 Selecting a bitmap file(BMP)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7-25

7.4 Touch screen coordinate correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-27
7.5 Backing up data to USB memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-28
7.6 Editing standard pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-33
7.7 Editing Substitution Rules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-35
7.8 Selecting Languages  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-36

Summary of Contents for RX2



















































































































































































































Reviews:

No comments

Related manuals for RX2

Samsung SPP 2020 - Photo Printer - 20 Sheets Manual Del Usuario preview
SPP 2020 - Photo Printer - 20 Sheets
Brand: Samsung Pages: 81
Samsung ML-6000 Bedienungsanleitung preview
ML-6000
Brand: Samsung Pages: 98
Samsung ML-4050N Compatibility Manual preview
ML-4050N
Brand: Samsung Pages: 6
Samsung ML-3750ND User Manual preview
ML-3750ND
Brand: Samsung Pages: 203
Samsung ML-3312ND Manual Del Usuario preview
ML-3312ND
Brand: Samsung Pages: 264
Samsung ML-2165W/XAA Manual Del Usuario preview
ML-2165W/XAA
Brand: Samsung Pages: 228
Samsung ML-2165 User Manual preview
ML-2165
Brand: Samsung Pages: 211
Samsung ML-2525 Brochure & Specs preview
ML-2525
Brand: Samsung Pages: 5
Samsung ML-1865W Manual Del Usuario preview
ML-1865W
Brand: Samsung Pages: 92
Samsung ML-1865W User Manual preview
ML-1865W
Brand: Samsung Pages: 75
Samsung ML-6060 Technical Instructions preview
ML-6060
Brand: Samsung Pages: 11
Samsung ML-1450 Series Manual Del Usuario preview
ML-1450 Series
Brand: Samsung Pages: 206
Samsung ML 3050 - B/W Laser Printer Manual Del Usuario preview
ML 3050 - B/W Laser Printer
Brand: Samsung Pages: 103
Samsung ML 3050 - B/W Laser Printer User Manual preview
ML 3050 - B/W Laser Printer
Brand: Samsung Pages: 215
Samsung ML-1450 Series Quick Manual preview
ML-1450 Series
Brand: Samsung Pages: 2
Samsung CLP 510N - Color Laser Printer User Manual preview
CLP 510N - Color Laser Printer
Brand: Samsung Pages: 266
Samsung 550N - CLP Color Laser Printer Manual De Instalación preview
550N - CLP Color Laser Printer
Brand: Samsung Pages: 296
Samsung CLP-415NW User Manual preview
CLP-415NW
Brand: Samsung Pages: 276

Brands by name

Popular brands

Load more brands