7-31
●
Backing up data to USB memory
(4) Data copy operation from other models
●
Data created on KX, PX, PB, PXR or RX can be copied to RX2.
Following operations 1 through 3 must be conducted prior to using other model's data on RX to store the
backup data of other models in the USB memory via a PC.
Prior operation
1. Create a "RXDAT" folder if it does not already exist in USB memory.
2. Create a new folder with the name of the printer's model name (KX, PX, PB or
PXR) under the "RXDAT" folder created in 1. above.
3.
KX
Create a new folder and change its name to [8-digits serial number] under
"KX" folder created in 2. above.
Create a "IJPDATA" folder under the folder saved as the [8-digits serial
number] and copy every backup data file to "IJP DATA" folder.
PB
Copy the backup serial number folder which is created on PB and rename
it as [8-digits number] under the "PB" folder created in 2.
PX,
PXR
Copy the backup serial number folder which is created on PX or PXR
under the "PX" or "PXR" folder created in 2.
USB memory
RXDAT
KX
00000000
IJPDATA
USB memory
RXDAT
PB
00000001
USB memory
RXDAT
PX
00000002
00000003
PXR
