●
Safety Precautions (5)
SAFETY PRECAUTIONS
(Continued)
CAUTION
●
Only persons who have completed an operator training course for
Hitachi IJP can operate and service the printer.
If the printer is operated or serviced incorrectly, it may malfunction or break
down.
●
Do not attempt to make repairs for any purpose other than operation or
maintenance.
●
Since the ink and makeup contain organic solvents, observe the
following handling precautions.
Secure adequate space for the ink/makeup handling area and printer
installation site. At least 200 m must be provided per print head.
Ensure that adequate ventilation is provided.
When handling the ink or makeup, wear protective gloves and safety goggles
to avoid direct skin contact. If the ink or makeup comes into contact with
skin, wash thoroughly with soap and warm or cold water.
When transferring the ink or makeup to or from a bottle, exercise caution to
prevent it coming into contact with the printer or surrounding articles.
If there is any spillage, immediately wipe it clean using a cloth moistened
with makeup.
●
Ink and makeup must be stored as flammable liquids. Storage must
comply with local regulatory requirements. Consult the appropriate
regulatory agency for further information.
●
If extraneous noise enters the printer, it may malfunction or break down.
For maximum noise immunity, observe the following installation and wiring
precautions.
Ensure that 100 to 120 VAC or 200 to 240 VAC power cables are not
bundled with other power supply cables.
Insulate the printer main body and print head so that they do not come into
direct contact with the conveyor or other devices.
If the employed print target detector is housed in a metal case, use a plastic
mounting brace for the purpose of insulating the detector from the conveyor
and other devices.
Be sure that the print target detector wiring is not bundled together with other
power supply cables.
●
Please make sure the print status and print content are correct each time when
you start operation of IJP.
●
Please implement periodical checkup of print status in the process, even
including during production.
●
A touch panel is employed for data entry to operation screen.
When manipulating the Touch panel, use only fingers. If the touch panel is
operated with metal and/or sharp objects such as ball point pen, it may
malfunction or break down.
1
2
3
3
2
1
3
4
