●
Print characters 4-32
4.9 Print characters
Ex. Dedicated character (Simple Chinese)
Lines and Message length (Characters)
Model type
1 line
2 lines
3 lines
RX2-B
60 char. × 1 line
30 char. × 2 lines
20 char. × 3 lines
RX2-S
120 char. × 1 line
60 char. × 2 lines
40 char. × 3 lines
*) RX2-S OP : Up to 5 lines
OP : Up to 1,000 characters
4.9.1 Print fixed characters
(1) Function
●
Inputs the characters to be printed.
●
The kinds of characters which can be input are defined for each character size. Moreover, there is an
appropriate inter-character space depending on the kind of character. (See “4.7.4 Set dot matrix,
inter-character space, and other parameters”.)
●
There is an “Insert” mode and an “Overwrite” mode when inputting.
●
“Duplicate” by selecting the start and end of the character string and “Paste” at an arbitrary position are
possible.
●
The characters which can be set as dedicated characters are shown below.
For dedicated characters, single words are handled collectively at input and deletion.
●
Inputting an Arabic character will move the cursor to the left.
●
Use the Insert mode to input Arabic characters.
●
There are no limits on the number of digits which can be input at one print item.
