--- 9 ---
(3) Removal of the Housing Ass'y
[21] <21>
and the Body Ass'y
[42] <44>
(Fig. 3)
(a) Loosen the two Machine Screws M4 x 10
[48] <50>
and remove the Shoe Plate
[63] <65>
and the Shoe
Cushion
[62] <64>
.
(b) Put a Phillips-head screwdriver through a hole of the Body Ass'y
[42] <44>
and loosen the Tapping Screw
(W/Flange) D4 x 16 (Black)
[29] <29>
. Then remove the Housing Ass'y
[21] <21>
.
Fig. 3
Body Ass'y
[42] <44>
Housing Ass'y
[21] <21>
Tapping Screw (W/Flange)
D4 x 16 (Black)
[29] <29>
Shoe Plate
[63] <65>
Shoe Cushion
[62] <64>
Machine Screw
M4 x 10
[48] <50>
(4) Removal of the Armature
[4] <4>
(Fig. 4)
(a) Loosen the two Brush Caps
[27] <27>
and remove the two Carbon Brushes (1 Pair)
[26] <26>
.
(b) Pull out the Armature
[4] <4>
while hitting the Housing Ass'y
[21] <21>
with a wooden mallet or plastic
hammer from Pulley (A)
[1] <1>
side.
* Be careful not to crush the fan and the Dust Plate
[8] <8>
while hitting the Housing Ass'y
[21] <21>
.
(c) Remove the Dust Plate
[8] <8>
and the Fan Guide
[9] <9>
.
(d) Pulley (A)
[1] <1>
has left-handed thread. To remove Pulley (A)
[1] <1>
, hold the Armature
[4] <4>
with a
vice with care not to damage it and turn Pulley (A)
[1] <1>
in a clockwise direction with a wrench.
Fig. 4
Housing Ass'y
[21] <21>
Armature
[4] <4>
Fan Guide
[9] <9>
Pulley (A)
[1] <1>
Dust Plate
[8] <8>
Carbon Brush
(1 Pair)
[26] <26>
Brush Cap
[27] <27>
Summary of Contents for SB 10S2
Page 28: ......