--- 10 ---
(5) Removal of the Stator Ass'y
[11] <11>
(Fig. 5)
(a) Loosen the three Tapping Screws (W/Flange) D4 x 16 (Black)
[29] <29>
and remove the Handle Cover
[17] <17>
.
(b) Loosen the Machine Screws (W/Washer) M3.5 x 6
[33] <33>
which tighten the lead wires from the Stator
Ass'y
[11] <11>
to Switch (E) (1P Screw Type) W/Lock
[32] <30>
.
(c) Remove the two Brush Terminals
[12] <12>
from the brush holder of the Housing Ass'y
[21] <21>
.
(d) Loosen the two Hex. Hd. Tapping Screws D5 x 55
[10] <10>
.
(e) Pull out the Stator Ass'y
[11] <11>
while hitting the Housing Ass'y
[21] <21>
with a wooden mallet or
plastic hammer.
Fig. 5
Stator Ass'y
[11] <11>
Housing Ass'y
[21] <21>
Tapping Screw (W/Flange)
D4 x 16 (Black)
[29] <29>
Switch (E)
(1P Screw Type)
W/Lock
[32] <30>
Machine Screw
(W/Washer)
M3.5 x 6
[33] <33>
Brush Terminal
[12] <12>
Handle Cover
[17] <17>
Hex. Hd. Tapping
Screw D5 x 55
[10] <10>
Summary of Contents for SB 10S2
Page 28: ......