--- 11 ---
9-2. Reassembly
Reassembly can be accomplished by following the disassembly procedures in reverse. However, special attention
should be given to the following items.
(a) Fill the gear cover with Shell Alvania RL3 Grease.
(b) Impregnate the felt on the body and the idle pulley with 1.5 cc of Turbine Oil No. 90.
(c) When tightening the Tapping Screw (W/Flange) D5 x 45
[15] <15>
through the Dust Cover
[16] <16>
into
the Housing Ass'y
[21] <21>
(Fig. 6), match "B" portion of the Dust Plate
[8] <8>
with "A" portion of the
Dust Cover
[16] <16>
as shown in Fig. 7. Pay attention not to crush the Dust Plate
[8] <8>
with the ribs.
Fig. 6
Housing Ass'y
[21] <21>
Armature
[4] <4>
Pulley (A)
[1] <1>
Dust Cover
[16] <16>
Dust Plate
[8] <8>
Fan Guide
[9] <9>
Fig. 7
Tapping Screw
(W/Flange)
D5 x 45
[15] <15>
Dust Plate
[8] <8>
Dust Cover
[16] <16>
"A" portion
"B" portion
Summary of Contents for SB 10S2
Page 28: ......