7
Lid Lock indicator
Selects programs. The program changes each time the button is pressed.
Automatically cleans the outside of the tub and the inside of the outer tub
to keep the washing machine clean. This setting is switched off at the
time of shipment from the factory. Once switched on, the Auto Self Clean
function operates every time you wash your laundry.
Records the selected course, water level, wash time, rinse time and spin
time when it is pressed for 3 seconds. To recall a recorded course, press
this button after the washing machine is turned on.
Switches to the Delay Timer mode, and the time set for the Delay Timer is
shown on 13, the Water Level/Timer indicator. Press it again to return to
the Water Level mode.
Locks the lid during the rinse and spin cycle. The lid cannot be opened
while this indicator is lit. To release the lock, press the Start/Pause button
to pause operation. The lock is automatically released after a short time.
When the lid is opened, it shows the water level. When the lid is closed, it
shows the remaining time.
Adjusts the delay time and water level. The maximum amount of water
that can be set varies according to the program. In the Delay Timer mode,
the delay time can be set between 3 and 12 hours.
Shows the washing time.
Changes the washing time. The washing time can be set between 3 and
24 minutes.
Shows the rinse settings. When EX appears in the indicator, the washing
machine does water-injection rinse.
Changes the rinse time.
Shows the spin time.
Changes the spin time. The spin time can be set between one and 9
minutes.
Control Panel and Display
Program button
Auto Self Clean button
Delay Timer/Water
Level Switching button
Memory button
(Only 240XWV, 200XWV)
Water Level/Timer/
Remaining time
indicator
Delay Timer/Water
Level button
Wash indicator
Wash button
Rinse indicator
Rinse button
Spin indicator
Spin button
Summary of Contents for SF-180XWV
Page 31: ...31 Memo ...
Page 32: ...3WPL102611 ...