background image

39

Problem

Thing to check

Instructions

Auto dosing function 

is not working

Please make sure that Auto dosing function 

is set.

When the following courses are selected, 

the Auto dosing function of liquid detergent 

will not work.

Tub clean, Tub dry, Stain care, Easy refresh 

and Hot tub clean.

When the following course is selected, the 

Auto dosing function of fabric softener not 

work.

Water save, Tub clean, Tub dry, Easy 

refresh and Hot tub clean.

Please set the Auto dosing function 

(page 16)

Make sure that the liquid detergent tank and 

fabric softener tank are installed correctly.

Install the liquid detergent tank and fabric 

softener tank correctly.(page 16)

Liquid detergent and fabric softener tanks

•  Check the remaining amount of liquid 

detergent and fabric softener in the tank.

Replenish with liquid detergent or fabric 

softener (page 16)

In the following cases, altered components 

may remain in the liquid detergent tank and 

fabric softener tank.

•  When the lid of input hole is left opened 

or when the remaining amount in the tank 

is low.

•   When the liquid detergent or fabric 

softener in the tank becomes jelly-like

•  When using highly viscous, solidi

fi

 ed, or 

separated products

•  When the Auto dosing function is not used 

for more than a month

Clean the liquid detergent tank, fabric 

softener tank, and their routes.

Select 9 hours when cleaning their routes. 

(page 35-37)

Since the used amount of each time is small, 

it may not be possible to tell visually whether 

it was automatically loaded correctly.

Increase the amount of clothing and check 

that the remaining amount in the tank has 

been changed.

When you put 

detergent or fabric 

softener in Dispenser 

and also set “Auto 

dosing” function.

Too much detergent and fabric softener will 

be added.

We recommend that you wash it again.

When you want to 

use bleach with “Auto 

dosing” function.

After the start, add bleach to Dispenser 

according to the detergent amount 

(approximate) indication.

Be careful where you put the bleach.

(page 16)

The inside of Tank lid 

and Indicator piece 

are wet

Condensation may occur due to humidity, 

but this is not a malfunction.

Wipe it o

  with a soft cloth.

When the liquid 

detergent or 

fabric softener is 

automatically added, 

it makes a frog-like 

sound.

Please check the following.  

 

Check if the tank is empty.  

 

Make sure the tank 

fi

 lter is not clogged.

This is the sound of a piston.  

We recommend the following: 

 

Replenish with liquid detergent or fabric 

softener to 

fi

 ll up 

 

If the inside of the tank is stuck, perform 

maintenance. (page 35)

Power outage

-

The washing machine is equipped with a 

restart function.

If a power outage occurs while the washing 

machine is operating, the cycle (i.e., wash, 

rinse, or spin) at that time is save, and when 

the power is restored, automatically restart 

from the interrupted cycle.

If there is a power outage during the spin 

cycle, the lid is locked and cannot be 

opened. After the power is restored, the lock 

is released.

Troubleshooting

Summary of Contents for SF-220ZFV













































Reviews: